Theben eltimo 020 s Manual

eltimoneu GB - 310 300 03_eltimoneu GB - 310 300 20.01.14 13:43 Seite 1
Automatic Switch for
Power Outlets
eltimo 020 s
eltimo 020 s DCF
1.
Description
1 For setting the real time
2 For setting day of the week
3 Cursor for indication of day of week
(1 = Mo, 2 = Tu ...)
4 Hours display
5 Display for automatic summer
wintertime switching
6 RC display flashes while the switch is
trying to receive the DCF signal
(with DCF device)
2.
Appropriate Use
The eltimo 020 s is an automatic switch featuring weekly programs and random
switching.
The eltimo 020 s DCF version is capable of receiving the DCF77 time signal to gua-
rantee that the correct time is always displayed even when switching between sum-
mer and winter time.
3.
Initial Startup
To provide for interference-free signal reception, the switch should always be
installed at a distance of approx. 1 m from other electrical devices (e.g. PC)!
After the DCF signal has been received, the switch is immediately ready for use.
1. Plug the switch (eltimo 020 s DCF) into the power outlet.
2. The RC icon flashes while the DCF signal is being received. After a few minutes,
the RC icon stops flashing and the time will be set automatically.
If the switch is still unable to obtain a DCF signal after a few minutes, the time must
be set manually (see chap. 5).
4.
Initial startup without auto summer-/wintertime adjustment 020 s
A. Setting week program
1. Press button RES.
2. Select adjustment rule no with button
3. Store by pressing Prog button.
4. Hold down button .
5. Set the day by pressing button d (1 = Mo, 2 = Tu, ...)
6. Set the actual time by pressing button h and m.
7. Please release button .
B. Setting day program
See above without 5.
Initial startup with auto summer-/wintertime adjustment
1. Press button RES.
2. Select adjustment rule e.g. dat 1
with button .
3. Store by pressing Prog button.
4. Set the year by pressing button d.
310300 03
6 6
5 5
RC
4 4
1 2 3 4 5 6 7
3 3 d d h h m m
RES RES
Prog Prog
2 2
1 1
020 s / 020 s DCF
7 Display minutes
8 For switching condition display
ON / OFF
and permanently ON
9 Hours setting
/ 10 Minutes setting
11 RESET (complete deletion)
12 Random program
13 Channel selection ON
14 Programming/ interrogation
020 s DCF
.
Setting beginning of beginning of
are summer time winter time
dat bis last sunday last sunday
12/95 in march in september
dat 1 last sunday last sunday
from 1/96 in march in september
dat 2 last sunday 4 th. sunday
in march in october
dat 3 first sunday last sunday
in april in october
no no no
adjustment adjustment
5. Store by pressing Prog button.
7 7
8 8
6. Set the date of the day by pressing button d.
9 9
10 10
7. Use button m to set the date of the month.
11 11
8. Store by pressing Prog button.
12 12
13 13
9. Hold down button
14 14
setting operation.
A. Setting week programm
Result: Switching times can be individually set for every week.
10. Press button d. The current weekday is automatically set.
11. Set the actual time by pressing button h and m.
OFF
12. Release button .
B. Setting day program
Result: All programmable switching times will
/ OFF
be executed at the same time
every day.
See above without 10.
5.
Setting/changing the current time
1. Hold down button
2. Change the current time by pressing button h und m.
Set the day by pressing button d.
(applies to 020 s DCF only)
3. Release both buttons.
If a DCF signal is received later on, e.g. at
night, the set time is automatically corrected.
6.
Programming
A. Week program
Prerequisite: The initial start-up must have been performed as described in
sections 5.1 A and 5.2 A.
Result: Same switching time on different days of the week.
Programming switch-on time
1. Press button Prog.
2. Press button d for day selection.
3. Store with Prog.
Identical switching time on several days of the week (e.g. Monday to Friday 1-5).
Repeat the programming steps 2. and 3. until the cursors
4. Set the switch-on time by pressing button h and m.
5. Store by pressing Prog.
Programming switch-off time
020 s
with button
6. Select icon
Valid for
7. Repeat setting 2. - 5.
region
EU
B. Day program operation
EU Prerequisite:
The initial start-up must have been performed as described in sections 5.1 A
GB (earlier)
and 5.2 A.
See above but without 2. and 3.
North
RES
for the next
d
020 s / 020 s DCF
.
d h
020 s / 020 s DCF
are positioned above 1-5.
d
Pr og
.
h m
m