Table of Contents
Advertisement
1. Connect your antenna or Cable TV signal to the IN FROM ANT (enna) plug
on the VCR.
2. Connect the OUT TO TV plug on the VCR to the 75 ohm plug on the TV
(connecting cable supplied with the VCR).
3. Refer to the owner's manual included with your VCR for other possible
connections and TV/VCR operating details.
Connecting to DVD/VCD/VCR/CATV BOX
Connect devices with cables provided. Select Composite or S-Video input from On
Screen Display (OSD) Menu. Refer to the Controls and Indicators section in this
document for more information on the OSD. S-Video Source generally yields better
video performance than composite.
Connect device with cables provided. Select Component input from OSD Menu.
For optimal performance use YPbPr for HDTV formats.
Advertisement
Table of Contents
