Disabling Alarms For An Asset In A Console - Honeywell Experion LX Operator's Manual

Responding to alarms
When the suppression of audible annunciations is not enabled, the Suppress audible
annunciations button does not appear on the Alarm Summary.

Disabling alarms for an asset in a console

You can disable alarms by asset for a particular console, using the Console configuration
display.
When you disable alarms within a console for an asset, the asset's icon in the Location Pane
will be overlaid with a
Attention:
Be aware that when you disable alarms for an asset, you will also disable any
alerts on the point.
Prerequisites
For alarm disabling by console to work with TPS alarms, you must select
n
Automatically synchronize console asset enable state from Experion to TPS on the
Configuration tab of the System Interfaces TPS Connection display.
You have the security level (or higher) required to enable or disable alarms for assets
n
within a console. For more information, see "Configuring the minimum security level
required to enable or disable alarms for assets within a console."
To disable alarms within a console for an asset
1. On Station, choose ConfigureSystem HardwareConsoles.
The Consoles configuration display appears.
2. Click the console where you want alarms disabled for the asset.
The Console configuration display for the selected console appears.
3. Click the Alarm enable tab.
When disabling alarms for assets, you will only see assets within your scope of
responsibility. If you have MNGR security level, you can disable alarms for assets in
another console. Note that alarms disabled within a console will still be visible to
anyone with MNGR security level.
4. Clear the check box associated with the asset to disable its alarms within the console.
Honeywell 2017
.
156