Merlin Digital iCam 360 degrees Instruction Manual

Thank you for purchasing this Merlin Product. Please read the
instruction manual carefully before using the product.
The documentation provided will allow you to fully enjoy all the
features this unit has to offer.
Please save this manual for future reference.
Instructions:
A 360° camera made especially for your iPhone.
Charging:
Before using the camera please fully charge it using a 5V/2A micro USB
charger (6 in the diagram below). While charging the LED will light up
red and once fully charged the LED will go off. When the battery is low
the red led will flash.
Power-on and off:
To switch on the unit press the power button (8 on the figure below)
for about 2 seconds. The led will be blue and then turn
The unit can be used:
i) On its own
The unit can be used by itself to capture images and videos while
ii) App Operation:
Figure 1: iOS App download
Use your iPhone to scan code in Figure 1. The download link can
also be found via the Merlin website by searching for.
This application supports iOS 9.0 and above.
Connecting the iCam360:
Once camera is turned on, connect to the iPhone via the Lightning
interface as shown in Figure 2 below:
Figure 2
Wait until the iPhone pop up as shown in Figure 3. Click 'Allow'
which automatically starts the App and the iPhone will
automatically rotate the screen 180°. If you select 'Ignore', your
camera will not be connected. When connection is successful the
preview interface will be as in Figure 3 below:
Figure 3
VPai IOS App Instructions:
VPai App contains the following features: i) VPai: including camera
settings, photo shoot, video recording, live management; ii) Gallery:
view and edit photos / videos; iii) Share: select the image / video in
the Gallery to share it with Social platforms; iv) Space: VPai built-in
sharing platform; v) Me: Account management.
i) VPai
After connecting camera Application interface, Dimensional photo
interface can be divided into: shrinkage photography, video, photos
and four live moved. Touch/slide the mode button to switch to the
corresponding mode. When the SD card is inserted, the SD card
icon is displayed in the upper right corner as shown in Figure 4.
Figure 4
1