The following three modes are available. To switch the mode, hold down the [
and the [
] button at the same time.
Power saving feature
Mode 1 (Default setting)
Mode 2
Mode 3
*1 This feature automatically switches to standby mode after 20 minutes of inactivity when no image is being input, or after 20 minutes when AV mute is
enabled.
*2 The [
] button shows/hides images. Hold down to switch to standby mode.
➡ "Standby Mode and AV Mute" p.17
*3 You can check the mode by the number of times the LED flashes white immediately after making settings.
In Mode 3, the [
] button is disabled which helps to avoid operation mistakes when you want to show the display at