Advertisement
Available languages
Available languages
headboard bracket installation guide (optional)
A 9/16" (14mm) socket wrench and 1/2" (13mm) crescent wrench are necessary to complete installation.
STEP 1
a.) Align the hole in the bracket to the brass sleeve into which the leg
threads. Hold the bracket in place and screw the leg into the base
until it is snug. DO NOT OVERTIGHTEN. Too much force may cause
the leg to spin freely.
b.) Align the tab with the hole in the frame (located towards the foot of
the base) and use a short bolt and nut to secure the bracket. Make
sure the bolt is tight.
14
Headboard Brackets are an optional accessory and are not included.
STEP 2
Attach the plastic spacer and T-Bracket.
a.) Measure the distance between the mounting holes on the
headboard and install the spacer and attachment plate to
accommodate the headboard.
b.) To install the plastic spacer and attachment plate, you will need
(2) long bolts and (2) nuts. Place the spacer and attachment plate
in the desired location and slip the bolts through the holes with
the head of the bolt facing outward. Position the bolts diagonally
on the spacer. Use the 9/16" (14mm) socket wrench and 1/2"
(13mm) crescent wrench to tighten the bolts.
STEP 3
You may now connect your headboard to the attachment plates using the
remaining short bolts and nuts to secure it to the brackets. The heads
of the bolts will face outward. Use the 9/16" (14mm) socket wrench and
1/2" (13mm) crescent wrench to tighten the bolts.
Hide quick links:
Advertisement
Chapters
Need help?
Do you have a question about the Ease and is the answer not in the manual?
Questions and answers
How much does the Ease base weigh if I have to have someone move it to another house?
The weight of the Sealy Ease Twin Extra Long Adjustable Base is 131 lbs.
This answer is automatically generated
How do you pair a new remote to base?
To pair a new remote to the Sealy Ease adjustable base, follow these steps:
1. Ensure the base is plugged in, and the green light on the power box is on.
2. Check that all wires are properly connected.
3. Press the sync button on the power box twice; a light will turn on.
4. Remove the back cover of the remote.
5. Hold the pair button on the remote until a light turns on.
6. The power box light will turn off, indicating the remote is paired.
7. Put the back cover on the remote and test the functionality.
These steps should successfully pair the remote to the base.
This answer is automatically generated
I need a Manual for a Sealy heated mattress pad King Size Plush Top, Coral Fleece Bed Warmer Dual Controller
My bed does not function. We have checked all connections and put in new batteries in remote.
Your Sealy Ease bed remote may be locked due to accidental button presses. This can happen if certain buttons are held down simultaneously, activating a child safety lock. To unlock the remote, try pressing and holding the top of both the left and right buttons at the same time until the lights flash. If this does not work, reset the bed by unplugging it and ensuring it is in a flat position before reconnecting. If the issue persists, check for any mechanical problems by manually resetting the bed at the base.
This answer is automatically generated