Table of Contents
Advertisement
Quick Links
PRO COMP
SUSPENSION
K2079B/K2079BMX/K2079BP
56713B/56713BMX/56713BP
2009 Dodge 1500 Mega Cab/ 2500 4X4 6" Coil
Spring Lift kit
This document contains very important information that includes warranty information and instructions for
resolving problems you may encounter. Please keep it in the vehicle as a permanent record.
Advertisement
Table of Contents
Related Manuals for pro comp K2079BMX
Summary of Contents for pro comp K2079BMX
- Page 1 PRO COMP SUSPENSION K2079B/K2079BMX/K2079BP 56713B/56713BMX/56713BP 2009 Dodge 1500 Mega Cab/ 2500 4X4 6” Coil Spring Lift kit This document contains very important information that includes warranty information and instructions for resolving problems you may encounter. Please keep it in the vehicle as a permanent record.
- Page 2 56713B/K2079B Box 1 of 3-PN # 56713B/56713BMX-1 Revised 2.19.15 Part # Description Qty. Illus. Page DC601-1 PITMAN ARM 15-10995 BUMPSTOP 90-6029 HARDWARE PACK: Brake Line 15-10966 3/8” PLASTIC HOSE CLAMPS 13-20447 #10 X 1/2" HWH ZINC 90-2359 LOWER CONTROL ARM 90-2361 UPPER CONTROL ARM: 15 degree bend...
- Page 3 56713B/K2079B Revised 2.19.15 Part # Description Qty. Illus. Page 90-6430 HARDWARE PACK: 71-140802001000 14mm- 2.0 X 80mm HEX BOLT Gr. 10.9 .140CNUCZ 14mm- 2.0 STOVER NUT 73-01410930 14mm FLAT WASHER PLATED 13-90328 U-BOLTS: 5/8”-18– X 4.125” X 13.875 20-65471 HARDWARE PACK: U-BOLT 5/8"...
-
Page 4: Optional Equipment
56713B/K2079B Box 3 of 3 PN # 56713B-3 Revised 2.19.15 Part # Description Qty. Illus. Page 929592 FRONT SHOCK ABSORBER 7,11 929543 REAR SHOCK ABSORBER OR Box 3 of 3 PN # 56713BMX-3 MX6158 FRONT SHOCK MX-6 SHOCK ABSORBER 7,11 MX6100 REAR SHOCK MX-6 SHOCK ABSORBER OR Box 3 of 3 PN # 56708BP-3... - Page 5 Apply thread lock compound where specified. Please note that while every effort is made to ensure that the installation of your Pro Comp lift kit is a positive experience, variations in construction and assembly in the vehicle manufacturing process will virtually ensure that some parts may seem difficult to install.
-
Page 6: Front Installation
56713B/K2079B Revised 2.19.15 Front Installation 1. Prior to installing this kit. With the vehicle 6. Unbolt and remove the front track bar from on the ground, measure the height of your the vehicle. Save the OE bolts and hard- vehicle. This measurement can be re- ware for reuse corded from the center of the wheel, straight up to the top of the inner fender... - Page 7 56713B/K2079B Revised 2.19.15 ILLUSTRATION 2 SHOCK NUT RETAINER GROMMET DO NOT UNBOLT UPPER SHOCK BRACKET GROMMET RETAINER SHOCK MX6104 or 927591 UPPER COIL POCKET 17. Next, remove the hardware from the frame bracket holding the lower control arm in BUMPSTOP ILLUSTRATION 3 place.
-
Page 8: Upper Control Arm
56713B/K2079B Revised 2.19.15 UPPER CONTROL ARM ILLUSTRATION 4 90-2361 BUSHING 15-11187 BUSHING 15-11187 SLEEVE 2 3/8” BUSHINGS (TAPERED) 90-2114 15-10979 Front of Vehicle LOWER CONTROL ARM 90-2359 SLEEVE 90-2101 BUSHINGS (TAPERED) SLEEVE 15-10979 2009 models or 90-2101 2009 models or 15-10978 2010 models 90-8083 2010 models torque fasteners at this time. - Page 9 56713B/K2079B Revised 2.19.15 ILLUSTRATION 5 PASSENGER SIDE CONTROL ARM 90-2361. Bent end OEM BOLT to the rear of the truck NEW OEM CAM BOLT OEM BOLT CONTROL ARM 90-2359 Use a Pitman arm puller to remove the OE retaining nut and tighten until snug. pitman arm.
- Page 10 See ILLUSTRATION 7. 34. Use the entire supplied thread locking 39. Install your new Pro Comp shocks (PN compound to thoroughly cover the entire 929592, MX6158 or ZX2009) through the surface of the threads on the Pitman arm coil spring from the engine compartment.
- Page 11 56713B/K2079B Revised 2.19.15 ers and nuts from 90-6024 to attach the ILLUSTRATION 7 90-1010 to the sway bar end. Use the SHOCK NUT Coil Spring/Shock Install 3/8” X 2 1/2” hardware from 90-6024 to attach the 90-2357 to the 90-1010. See RETAINER ILLUSTRATION 8.
- Page 12 56713B/K2079B Revised 2.19.15 90-4460 ILLUSTRATION 9 7/16” Nut Track Bar 90-7882 7/16” Washer Track Bar Drop Bracket 5/8” X 4 Side View 1/2” Bolt Front of Vehicle OE Crossmember OE Frame Mounting 90-8233 Pocket X-member 90-8232 90-8231 Sleeve 90-8231 Shorter Longer Sleeve Sleeve...
- Page 13 56713B/K2079B Revised 2.19.15 Insert the 3/4” X 1 1/2” crossmember vehicle by rotating the cam until the sleeve (90-8233) in the center hole in the measurement is equal on both sides. crossmember. See ILLUSTRATION 9. Torque the cam bolt to ft./lbs.
-
Page 14: Rear Installation
56713B/K2079B Revised 2.19.15 Rear Installation tory spring pack will have two metal 1. Block the front tires and raise the rear of pins on the bottom, it may have a third the vehicle. Support the frame with jack plastic pin in the center. To install the stands forward of the rear springs. - Page 15 17.After test driving: If there is a rear drive 13.Install your new Pro Comp shocks line vibration you can install shim kit 51255 (929543, MX6100 or ZX2001) and torque with hardware pack 90-6327. Try various combinations until the vibration is eliminated.
-
Page 16: Decimal System
56713B/K2079B Revised 2.19.15 Bolt Torque and ID Decimal System Metric System All Torques in Ft. Lbs. Bolt Size Grade 5 Grade8 Bolt Size Class 9.8 Class 10.9 Class 12.9 5/16 7/16 9/16 1/2-13x1.75 HHCS M12-1.25x50 HHCS Grade 5 Grade 8 (No. - Page 17 56713B/K2079B Revised 2.19.15 MODIFICATIONS PAGE: 9.23.12: Removed 56713 BOM box-2 and added 56716 box-2 to the BOM. Changed Illustration #9 and the track bar installation text to reflect the part changes. 11.9.12: Removed 90-3561, 96-5068 and 90-6268 from BOM box-1. 12.7.12: Removed BF &...
Need help?
Do you have a question about the K2079BMX and is the answer not in the manual?
Questions and answers