1. Manuals
  2. Brands
  3. Metra Electronics Manuals
  4. Automobile Accessories
  5. 99-7860
  6. Installation instructions manual

Metra Electronics 99-7860 Installation Instructions Manual

Din head unit provision with pocket
Hide thumbs Also See for 99-7860:
1
2
3
4
5
6
7

Advertisement

Table of Contents

INSTALLATION INSTRUCTIONS FOR PART 99-7860
99-7860
KIT FEATURES
• DIN Head Unit Provision With Pocket
• ISO DIN Head Unit Provision With Pocket
• Stacked ISO Head Unit Provision
• Double DIN Head Unit Provision
KIT COMPONENTS
• A) Single DIN Radio Housing • B) ISO Brackets • C) ISO Trim Plate
• D) Double DIN Trim Plate
A
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
• 70-1721 - Honda/Acura harness 1998-up
Antenna Adapter
• Not Required
• Phillips Screwdriver • Offset Tool (Not Pictured)
APPLICATIONS
Honda Civic SI
2002-2005
(US Models Only)
B
TOOLS REQUIRED:
C
D

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 99-7860 and is the answer not in the manual?

Questions and answers

Related Manuals for Metra Electronics 99-7860

Summary of Contents for Metra Electronics 99-7860

  • Page 1 INSTALLATION INSTRUCTIONS FOR PART 99-7860 APPLICATIONS Honda Civic SI 2002-2005 (US Models Only) 99-7860 KIT FEATURES • DIN Head Unit Provision With Pocket • ISO DIN Head Unit Provision With Pocket • Stacked ISO Head Unit Provision • Double DIN Head Unit Provision KIT COMPONENTS •...
  • Page 2 99-7860 DASH DISASSEMBL Y Honda Civic SI 2002-2005 Remove (3) Philips screws securing isconnect the negative battery the climate control pod to the back of terminal to prevent an accidental the dash trim bezel and remove the short circuit. pod.

  • Page 3: Din Head Unit Provision With Pocket

    99-7860 KIT ASSEMBL Y DIN HEAD UNIT PROVISION WITH POCKET Note: Refer also to the instructions included with the aftermarket radio. Slide the DIN cage into the radio opening of the Housing and secure by bending the metal locking tabs down.

  • Page 4: Iso Din Head Unit Provision With Pocket

    99-7860 KIT ASSEMBL Y ISO DIN HEAD UNIT PROVISION WITH POCKET Note: Refer also to the instructions included with the aftermarket radio. Align the holes in the ISO Snap-In Backets with the holes in the head unit and mount the brackets to the head unit with the screws supplied with the unit.

  • Page 5: Double Din Head Unit Provision

    99-7860 KIT ASSEMBL Y DOUBLE DIN HEAD UNIT PROVISION Note: Refer also to the instructions included with the aftermarket radio. Align the holes on the factory backet assembly with the holes on the after- market Double DIN head unit and mount with the screws supplied with the unit.

  • Page 6: Stacked Iso Head Unit Provision

    99-7860 KIT ASSEMBL Y STACKED ISO HEAD UNIT PROVISION Note: Refer also to the instructions included with the aftermarket radio. Align the holes on the factory backet assembly with the holes on the after- market ISO head units and mount with the screws supplied with the unit.

  • Page 7: Final Assembly

    99-7860 FINAL ASSEMBL Y FINAL ASSEMBL Y (A) Strip wire ends back 1/2" B) Twist ends together C) Solder D) Tape Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individ- ually tape off the ends of any unused wires to prevent electrical short circuit.)

Table of Contents