Size 3 To 5 Heatsink Fan Removal Procedure; Size 3 To 5 Heatsink Fan Part Numbers - Nidec H300 User Manual

Safety Product Mechanical
information information installation
3.13.2

Size 3 to 5 heatsink fan removal procedure

Figure 3-58 Removal of the size 3, 4 and 5 heatsink fan (size 3 shown)
5
Ensure the fan cable is disconnected from the drive prior to attempting fan removal.
1. Press the two tabs inwards to release the fan from the drive frame.
2. Using the central fan tab, withdraw the fan assembly from the drive housing.
Replace the fan by reversing the above instructions.
NOTE
If the drive is surface mounted using the outer holes on the mounting bracket, then the heatsink fan can be replaced without removing the drive from
the backplate.
Table 3-23 Size 3 to 5 heatsink fan part numbers
68
Electrical Getting Basic Running the
installation started parameters
Model
Size 3
Size 4
Size 5
NV Media Card
Optimization
motor Operation
5
Building Advanced Technical
Automation parameters data
Heatsink fan part number
3251-0029
3251-0245
3251-0245
UL listing
Diagnostics
information
HVAC Drive H300
Issue Number: 3