1. Manuals
  2. Brands
  3. PHAST Manuals
  4. Home Automation
  5. PMB-RL6
  6. User manual

PHAST PMB-RL6 User Manual

Remote relay box
Hide thumbs
1
2
3

Advertisement

Table of Contents

User Guide
Model PMB-RL6 Remote Relay Box

Description

PHAST Remote Boxes are compact units that can be placed anywhere in a home, extending the
connectivity of the Landmark system while eliminating many long runs of control cable to PHAST
Hubs or MCUs. Remote Boxes communicate with the Landmark system via the PHASTLink data
bus, using one of the two RJ-45 ports on the rear panel. The other RJ-45 port can be used for
daisy-chaining additional devices.
The PMB-RL6 Remote Relay Box contains six dry-contact relays for controlling external devices,
such as screens, drapes, video lifts, and other closure-control equipment. Relays can be set to
normally open or normally closed with internal jumpers. Connection to external devices is via
screw-down Phoenix connectors on the rear panel. All Remote Boxes come with a 12VDC power
supply.
LEDs on the front panel indicate power and link status. An ID button provides ID information to
the Landmark system that facilitates easy connection of the physical Remote Contact Box with
the correct Remote Contact Box in software.

Specifications

•
Relays
6 dry-contact relays. Can be set to normally open or normally closed via
jumpers.
Relays are each rated 1 Amp @ 30VDC.
•
Network
2 RJ-45 PHASTLink ports, both functionally identical. Allows daisy chaining.
•
Power
12VDC, 1 Amp power supply (included).
•
Indicators Power, Link LEDs on front panel.
•
ID Data
ID button on front panel sends ID information for setup.
•
Height
1.5 in. (38 mm)
•
Width
5.1 in. (130 mm)
•
Depth
5.1 in. (130 mm)
Page 1 of 2
08/07/00

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PMB-RL6 and is the answer not in the manual?

Questions and answers

Summary of Contents for PHAST PMB-RL6

  • Page 1 Model PMB-RL6 Remote Relay Box Description PHAST Remote Boxes are compact units that can be placed anywhere in a home, extending the connectivity of the Landmark system while eliminating many long runs of control cable to PHAST Hubs or MCUs. Remote Boxes communicate with the Landmark system via the PHASTLink data bus, using one of the two RJ-45 ports on the rear panel.
  • Page 2 ID signal is sent to the box from the Landmark system. Technical Support If you experience problems with your PHAST products, double check all external connections, settings, and power sources before contacting your PHAST dealer or PHAST Corporation.
  • Page 3 Page 3 of 2 08/07/00...

Table of Contents