Insignia Portable Pico Projector Cube Quick Setup Manual page 2

USING YOUR PROJECTOR 3 Press and hold
TIP: For the best picture, use the projector in a
seconds to turn on the projector.
dark room or at a small size in a brighter room.
After turning on your projector, it
1 Connect your device to your
displays "waiting, " then mirrors your
projector. See "CONNECTING YOUR
device's screen.
PROJECTOR" for instructions.
4 Aim the lens at a screen or blank wall,
2 Place the projector on a hard, flat,
then turn the FOCUS dial to bring the
and steady surface.
projection into focus.
OR
Unfold and clip the tripod adapter
(included) to the projector, then
connect it to your tripod.
Notes:
• Make sure that the projector has enough
ventilation. Do not cover the projector.
• Keep the projector stable. Do not walk
around with the projector while in use.
5 Use your connected device to control
playback.
6 Press
Front Back
FOCUS
MHL/HDMI volume level between low, medium,
high, and mute. Make sure that your
connected device's volume is set to at
least 50%.
Note: You can also play audio through your
connected device's speakers.
Tripod adapter
Tripod
(not included)
7 To rotate the screen 180°, press and
(power) for three
hold for five seconds.
8 When finished, press and hold
(power) for three seconds to turn off
the projector.
TROUBLESHOOTING
Projector doesn't pair to Bluetooth speakers
• The projector does not support Bluetooth. Play audio
through your connected device's speakers.
My device does not recognize the projector
• If using an Android device, make sure that it is
FOCUS
MHL-compatible. Check with your device's
manufacturer for more information.
• If using an Apple device, make sure that you've
connected a digital AV adapter (with HDMI output).
The image blinks or changes color
• Recharge your projector or connected device.
to cycle the projector's
• The screen may blink if your phone receives a text
message or call while it is connected.
The image is distorted
• Point your projector straight at the wall, or try
different positions.
The image dims or turns off
• Turn off your source device's screen timeout.
• Turn off your source device, then turn it back on.
• If your projector is not connected to a device, it turns
off automatically.
SPECIFICATIONS
Projector does not display image/video
• The projector is waiting for a video signal through the
HDMI input. Make sure that your projector is
Display
connected to a compatible device.
LED life
• Make sure that your cable connections are correct and
Brightness
secure.
Focus
• Make sure that your projector and connected device
Resolution
are fully charged.
• Some apps may not support image projection.
Picture ratio
• If your device uses micro USB, try connecting the
Max screen size (diagonal)
5- to 11-pin adapter. DO NOT force the adapter to fit
Projection distance
into your device's port.
Max input resolution
• Check the documentation that came with your device to
Dimensions
determine whether it can display content through MHL.
Projector does not play sound or is too quiet
Weight
• Turn up the volume on your connected device.
Temperature
• Press to cycle the volume level to high.
Humidity
• Play audio through your connected device's speakers.
Charging time
Operating time
SAFETY INFORMATION
LEGAL NOTICES
• Do not squeeze or drop the projector.
• Do not store or use the projector in an extremely hot
FCC Statement
area, such as a parked car.
This device complies with part 15 of the FCC Rules.
• Do not disassemble or modify the projector.
Operation is subject to the following two conditions:
• Do not block the vents on the side or top of the
(1) This device may not cause harmful interference,
projector.
and (2) this device must accept any interference
• Do not expose the projector to extreme vibrations. It
received, including interference that may cause
may damage internal components.
undesired operation.
Industry Canada ICES-003 statements
CAN ICES-3 (B)/NMB-3(B)
PROJECTOR SPECIFICATIONS
AC Adapter information:
DLP DMD
Manufacturer: Kuantech Co. Ltd. Model: KSA29B0500200D5
20,000 hours (max)
Rating:
45 ANSI lumens (max)
Input: AC 100-240V, 50/60Hz, 0.5A
Output: DC 5.0V, 2.0A, LPS
Manual focusing dial
Max. Ambient Temperature: 40°C, Class II
nHD (640 × 360)
UL Approved
16:9
File No. E215890
80 in. (203.2 cm)
8 -118.1 in. (20-300 cm)
ONE-YEAR LIMITED WARRANTY
Up to 1080p
Visit www.insigniaproducts.com for
1.79 × 1.79 × 1.83 in.
details.
(4.55 × 4.55 × 4.65 cm)
0.26 lbs. (116 g)
CONTACT INSIGNIA:
Operating: 32~104°F (0~40°C)
For customer service, call
0~80%
4 hours 1-877-467-4289 (U.S. and Canada) or
100 minutes 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in China
V3 ENGLISH 16-1144