Advertisement
5
Remove the four screws securing the cover.
6
Remove the screw securing the indicator light PBA cover.
7
Pull the hook to remove the cover.
8
Squeeze the latches and push them downwards to remove the cover.
9
Remove the screw securing the cover of the indicator light and remove
the cover.
10
Cut off the lower part of the cable duct so that the connecting cable of
the S-plasma ion kit can be passed through.
11
Cut off the end of the indicator cover so that the connecting cable of
the S-plasma ion kit can be passed through.
12
Push the S-plasma ion kit into the holder on the air outlet until you hear
a click sound.
13
Push the connecting cable of the S-plasma ion kit into the cable duct to
fix it.
14
Connect the provided connecting cable to the connecting cable of the
S-plasma ion kit.
15
Open the PBA cover and connect the connecting cable of the S-plasma
ion kit to the CN801 connector.
PBA cover
Caution
• When reassembling the S-plasma ion kit, ensure to make the
connecting cable pass through the cable hole on the cover.
• Ensure the connecting cable of the S-plasma ion kit fixed firmly
to the cable duct.
• Ensure to finish the S-plasma ion kit installation before
connecting the cable.
16
Set the operating options for the S-plasma ion kit by using the wireless
remote control.
Setting the operating options for the S-plasma ion kit
• S-Plasma ion kit is an optional part, so factory default setting of an indoor
unit is 'Disuse of S-Plasma ion kit. When you install the S-Plasma ion kit
additionally, you need to set the option for correct operation of S-Plasma
ion kit as listed below.
• Input the setting option more than twice.
• For the correct operation, please reset the power supply after inputting
an option.
Note
• The S-plasma ion Kit does not operate until you set the operating
options after installation.
Category
4-way / 360 cassette indoor unit
Operating options
for disabling the
0D2160
S-plasma ion kit
Operating options
for enabling the
0D2161
S-plasma ion kit
• S-plasma ion ON/OFF control is available with
the button on the remote controller.
• If there is an operation malfunction, refer to
Instruction
the set service manual.
• Input the option by using the remote
controller.
Advertisement
