Advertisement
Quick Links
M-4 Pneumatic/Hydraulic Riveting Tool / 39058
The Marson M-4 pneumatic/hydraulic riveting tool is designed to set rivets
in all alloys in sizes from 3/32" to 1/4" diameter. Capable of setting 3/16"
and 1/4" T-Rivets/Klik-Split®, Klik-Lock and other structural blind rivets
(optional nosepiece may be required). Model M-4 is supplied with 1/4"
nosepiece installed in the operating position. Standard nosepieces for
3/32", 1/8", 5/32", and 3/16" diameter rivets are included among the
accessories supplied with the tool.The recommended air pressure is 95
Arconic
Fastening
Systems and Rings
PSI.
Weight: 4 lbs.
1925 N MacArthur Dr.
Suite 200
Tracy, CA 95376
Advertisement
Summary of Contents for Marson M-4
- Page 1 M-4 Pneumatic/Hydraulic Riveting Tool / 39058 The Marson M-4 pneumatic/hydraulic riveting tool is designed to set rivets in all alloys in sizes from 3/32” to 1/4” diameter. Capable of setting 3/16” and 1/4” T-Rivets/Klik-Split®, Klik-Lock and other structural blind rivets (optional nosepiece may be required).
- Page 2 Safety glasses should be worn at all times while operating tool. Changing Nosepiece General Information The Marson M-4 pneumatic/ hydraulic riveting tool is designed to set Connect M-4 to air pressure and press TRIGGER (37) until rivets in all alloys in sizes from 3/32” to 1/4” diameter. Capable of nosepiece has been removed and new nosepiece fully tightened.
- Page 3 Instructions and Parts List - #39058 M-4 AIR / HYDRAULIC RIVETER TOOL Ref. Q'ty Ref. Q'ty Ref. Q'ty Part No. Description Part No. Description Part No. Description /Tool /Tool /Tool 95835 Nosepiece 1/4"(6.4mm) 95851 O-Ring 23.7x3.5 9587 Trigger Rod 95897 Nosepiece 3/32"(2.4mm)
Need help?
Do you have a question about the M-4 and is the answer not in the manual?
Questions and answers