Table of Contents
Advertisement
Available languages
Available languages
Using Your Remote
Code Identification
1. Press and hold down the SETUP
2. Press and release the desired
3. Press and release the
4. Press and release the #1 button.
5. Press and release the ENTER
Reset to Factory
1. Press and hold down the SETUP
2. Press and release the
3. Press and release the number #0
button on the remote until the
red light on the remote control
turns on. Release the SETUP
button. The red light will
remain on.
device button (TV, STRM, AUD)
you would like the code for.
ENTER button.
Count the number of times the
remote light flashes. This is the
number corresponding to the
first digit of the code. Repeat
the process by pressing the
#2, #3 and #4 buttons for the
remaining digits.
button to exit this mode.
Settings
button on the remote until the
red light on the remote control
turns on. Release the SETUP
button. The red light will
remain on.
MUTE button.
button. The red indicator light will
flash twice.
11
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the SRP9232D/27 and is the answer not in the manual?
Questions and answers
does this remote have a return button
The provided context does not include a list of button functions or explicitly mention a return button. Therefore, it cannot be determined if the Philips SRP9232D/27 remote has a return button.
This answer is automatically generated
Need help programming
You can program the Philips SRP9232D/27 remote control using one of two methods: Direct Code Entry (recommended) or Auto Code Search.
### Direct Code Entry (Recommended)
1. Find the code list included with the remote.
2. Locate the section for the type of device you want to control (e.g., TV, STR, AUD).
3. Find your device's brand and note the corresponding remote codes.
4. Press and hold the SETUP button until the red light stays on.
5. Press the device button (e.g., TV, STR, AUD) for the device you are programming.
6. Enter the first code from the list using the number buttons.
7. If the code is correct, the red light will turn off.
8. Test the remote by pressing POWER or other functions. If the device does not respond, repeat with the next code.
### Auto Code Search
1. Turn on the device you want to control.
2. Press and hold the SETUP button until the red light stays on.
3. Press the device button (e.g., TV, STR, AUD).
4. Press and release POWER repeatedly until the device turns off.
5. Once the device turns off, press ENTER to save the code.
6. Test the remote to ensure it controls the device properly.
By default, the remote is pre-programmed for Samsung TVs (press TV) and Roku boxes (press STR).
This answer is automatically generated