Product Layout; Before Starting The Equipment; Charging The Battery Pack - Certa PowerPlus 18V Angle Grinder User Manual

Product Layout

Before Starting the Equipment

Important! Always remove the battery from the machine before doing any
work on it.

Charging the Battery Pack

1. Remove the battery pack (6) from the handle, pressing the pushlock
buttons (8) downwards to unlock it.
2. Check that your mains voltage is the same as that marked on the rating
plate of the battery charger. Plug the mains plug of the charger (7) into
the mains socket.
3. The temperature of the battery pack may rise slightly during the charging
operation. This is normal.
If the battery pack fails to charge, please check the following.
Whether there is voltage at the socket outlet.
Whether there is proper contact at the charging contacts on the charger.
If the battery is still failing to charge after checking these issues, please contact
the Kogan.com customer support team.
To ensure that the battery pack provides a long service life, you should take care
to keep it charged. Never fully discharge the battery pack, as this will greatly
reduce the battery lifetime.
1. Spindle Lock
2. Adjustable Safety Guard
3.
Auxiliary Handle
4.
Switch
5.
Main Handle
6.
Battery Pack
7. Battery Charger
8.
Pushlock Button
5