EE 4GEE WiFi Quick Start Manual

Thank you for choosing 4GEE WiFi Let's get your device connected
1. Lift the flap and insert the Nano-SIM into the
Here's a quick guide to get you up and running
slot with the gold contacts facing upwards.
and making the most of your new device straight
away.
For more help setting up,
visit http://ee.co.uk/simstart
If you're a devil for the detail, then visit ee.co.uk/
help/phones-and-device where you will find more
information about your 4GEE WiFi.
Use the included SIM tool to help fully insert
the Nano-SIM until it clicks into place.
2. Connect the reversible USB cable to charge 3. Once charged, you're ready to go. Press down
your 4GEE WiFi. Use of a 9V/1.67A or 9V/2A on the power button for a few seconds and
charger is recommended. your 4GEE WiFi will turn on.
4GEE WiFi supports Qualcomm Quick Charge
2.0. Using a compatible charger can halve the
time to power your unit.
0-25%
Battery level is shown on the button.
Charging up other devices
Use the full-size USB to power up other devices
like tablets and smartphones.
Note: Your 4GEE WiFi needs at least 25%
battery to charge smaller devices (like a
smartphone) and at least 50% to charge
26-50% 51-75% 76-100%
0-25%
larger devices like tablets.
Getting to know your 4GEE WiFi
Micro USB USB
Signal
strength
Network type
4G / 3G
ON/OFF& SMS
Battery level
Note: EE logo will illuminate when the device
is powered on.