Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Uponor Mini-Press Battery Tool
Summary of Contents for Uponor Mini-Press Battery Tool
- Page 1 RADIANT HEATING SYSTEMS MINI-PRESS BATTERY TOOL OPERATION MANUAL Connecting up to 1" Uponor, Inc. Uponor Multi-layer 5925 148th Street West Apple Valley, MN 55124 Composite (MLC) Tubing Tel: (800) 321-4739 Fax: (952) 891-1409 Web: www.uponor-usa.com...
- Page 2 For the most current technical information, go to the Uponor website at www.uponor-usa.com. Uponor is not liable for installation practices that deviate from this manual or are not acceptable practices within the mechanical trades. Refer to the Uponor Radiant Floor Heating Installation Handbook for proper installation methods for Uponor MLC tubing.
-
Page 3: Table Of Contents
Inspection and Pressure Testing ......15 www.uponor-usa.com Mini-Press Battery Tool Operation Manual... -
Page 4: Section 1 - Overview
• One battery charger (replacement part D6260002) • Operation Manual • Carrying Case Note: If any contents listed are missing or damaged, contact your Uponor sales representative or distributor for assistance. Note: To protect the tool and its accessories, keep all tool components in the carrying case. -
Page 5: Section 2 - Technical Data
Section 2 Technical Data Mini-Press Battery Tool Dimensions (with jaws) . . .3" W x 4" H x 18" L Weight ....5.5 lbs. (2.5 kg) Maximum Tubing Size . -
Page 6: Section 3 - Battery Operation
Battery Operation Charging the Battery Only use the included charger to charge the battery for the Mini-Press Battery Tool. Charge the battery before initial operation. 1. Remove the charger from the case. 2. Plug the charger into a standard outlet. -
Page 7: Charging Indicators
(Below + Pole) Tool Operation Solid Green Battery is charging. Refer to the following instructions to operate the Mini-Press Battery Tool. Solid Yellow Battery is 90% charged. 1. Before using the Mini-Press Battery Tool, always perform a test Flashing Green Battery is completely charged. -
Page 8: Tool Guidelines
6. Service the tool annually to ensure proper function and extend the life Tool Guidelines of the tool. Uponor offers the Tool Depot for service, repair or warranty • Ensure the locking pin is properly secure before making connections. work. For more information on the Tool Depot, refer to the Repairs •... -
Page 9: Safety Guidelines
Read and comply with all these guidelines before date of delivery (verified by invoice or delivery note). Damage caused operating the Mini-Press Battery Tool. Failure to do so can result in tool by normal wear and tear, overloading or improper handling are excluded damage or failure. -
Page 10: Section 5 - Making Mlc Press Fitting Connections
2. Uponor MLC Press Fittings are compatible only with Uponor MLC tubing. Do not use Uponor MLC Press Fittings on any other PEX tubing product. 3. Do not use other PEX tubing fittings on Uponor MLC tubing. PEX fittings are not compatible with Uponor MLC tubing. -
Page 11: Installing The Mlc Press Fitting
3. Reinstall the o-rings in their proper position on the fitting. 4. Keep the system under pressure until construction around the tubing system is complete. This ensures system integrity throughout the construction phase. www.uponor-usa.com Section 5 – Making MLC Press Fitting Connections... - Page 12 www.uponor-usa.com...
Need help?
Do you have a question about the Mini-Press Battery Tool and is the answer not in the manual?
Questions and answers