Setting Up A Safe Play Area For Vr - Lenovo Mirage Solo with Daydream Safety, Warranty & Quick Start Manual

Setting up a safe play area for VR

Clear the area directly around you of objects and furniture and
always stay aware of your physical surroundings!
Put the device on your head in the center of your clear area
whether seated or standing.
Always check your physical space by lifting the headset or
partially lifting it and peaking to make sure you are still in
your clear area before you start a session or manually
recenter your view.
When you put the device on your head or when you manually
recenter using the controller the device will use your position
at that moment as the starting point and fade your view to
prevent accidental walking if you move too far from this
starting point.
Your view will fade anytime you move close to your arms
distance away from your starting point. This play area is
approximately 0.8 m in radius but you will see your view gently
start to fade after about 0.4 m of movement toward the edge.
When you notice your view starting to fade carefully move
back towards the center of your clear area.
If you exit the safe play area, your view will be fully occluded.
Carefully move back towards your original starting point while
being aware of your surroundings.
Listen to all warnings in the headset and always stay aware of
your physical surroundings.
6