Markator FlyMarker PRO Brief Instructions

®
FlyMarker PRO
Brief instruction
This brief version instruction manual does not replace the operating manual!
The original operating manual delivered with the FlyMarker
read carefully, understood and followed.
1. Turning on FlyMarker
®
1. Turn FlyMarker PRO on with the ON/OFF-button.
√
The display lights up and the control performs a self-test.
√
The start window appears.
√
Press the spacebar. After a short time the main menu window appears.


FlyMarker PRO is in operator mode.
2.

Enter marking data

Characters can be entered through the keypad.
Use the arrow keys (
Use one of the arrow keys ( ↑↓ ) or the Enter key to switch between lines.
or
Use the Insert key to select the writing mode. The selected writing mode is shown in the main
menu.
The possibilities are:
Insert mode
The new character is inserted to the left of the cursor.
Overwrite mode
The character below the cursor is overwritten by the new character.
Use the shift-key to switch between uppercase and lowercase letters.
The F1-key can be used to select the special character level.
The possibilities are:
MARKATOR
Manfred Borries GmbH
Bunsenstraße 15
D-71642 Ludwigsburg
®
PRO
When it is turned on, FlyMarker
harmless stroke and therefore should not be placed on a
workpiece when being turned on
) to move the cursor to any place in the character sequence.
or
or
Tel.: +49 (0)7144 85 75-0
Fax.: +49 (0)7144 85 75-600
E-Mail: info@markator.de
®
PRO
®
PRO performs a light,
.
Internet: http://www.markator.de
has to be