XYZ Printing Da Vinci 3D Pen Cool Quick Manual

ENGLISH

◆ Package Content

3D Pen
1
Trial filament
4
(Including 6 x PCL filaments. Length:1 meter;
color: random)

◆ Product Diagram

DC in terminal
1
(Micro USB interface)
Extruder
8
module
【LED Messages】
Solid red light :
Powered on; cooled down.
Steady flashing red light :
Idling; cooling down.
Quick flashing red light :
Heating up.
(under cooling mode, heating will take
another 15 seconds)
Solid green light :
Nozzle is heated, it's ready to
load/unload filament now.
(Nozzle temperature reaches 60°C)
The nozzle cools down when idling for 60
seconds. To heat up the nozzle, simply press
any button.
Quick Guide
Micro USB cable
2
3D coloring worksheets
5
◆ Precaution
BURN HAZARD
Feeding hole
2
The nozzle of the 3D pen becomes heated. Do
1
not let the nozzle of the pen come in contact with
surrounding components before it completely
LED indicator
3
cools. Do not touch the extruded plastic materials
that have not yet cooled to prevent burns. The
heated nozzle of the pen and extruded plastic
materials may damage other objects, plastics,
fabrics, or other materials. Avoid touching
anything with these heated objects until the
nozzle is completely cooled.
Unload button
4
Load button
5
Air vents Keep the air vents open to ensure that the 3D pen
6
2
works properly.
The heated filaments generate certain odors
3
during the heating and extrusion process. Please
Nozzle use this product in a well-ventilated space.
7
Please use PCL filaments provided by XYZprinting
4
and follow the operations instructions when using
this product to avoid product damage and bodily
harm. Warranty void if non-XYZprinting filaments
are used.
The product is fully tested on the production line.
5
The testing material may be left in the nozzle. The
color of the extruded filament might differ from the
feeding filament in the first use.
The material in the nozzle might produce a slight
6
cracking sound while heating up.
Operating conditions
7
●Temperature: 20–35°C/ 68–95°F
●Humidity: 30–60% RH (non-condensing)
Storage conditions (including 3D Pen and filament)
8
●Temperature: 10– 40°C/ 50–104°F
●Humidity: 25–65% RH (non-condensing)
Power Requirements: USB power adapter with
9
support for 5V 2A (Power adapter not included)
It is suggested to store the filament in the zipped
10
bag after each use, keep it in a cool, dry place to
away from direct sunlight.
To prevent accidents, do not allow young children
11
to use and process troubleshooting unless
supervised by an adult.
Drawing pad
3
Quick guide /Warranty card
6
◆ Operation
◎Loading/Extruding the filament
Connect the Micro USB cable to the 3D pen
1
and the USB power adapter, and plug the
power adapter to a power source.
(the LED should be solid red light).
Press any button to begin heating up the
2
nozzle (the LED indicator should be steady
flashing red light).
Once the heating is complete (green indicator
3
is ON), press the [Load Button] twice to
activate continuous extrusion mode. Insert
XYZprinting filament into the feeding hole. Let
go of the filament once you feel the pen
taking in the filament on its own.
-1-