Table of Contents
Advertisement
Parts & Accessories
LID – TOP VIEW
Caution Label (Do Not Remove)
10
4-, 6-, 8-, 10-Quart Power Quick Pot™
LID – UNDERSIDE
Locking Pins
Float Valve
Pressure
Release
Valve
Steam
Release
Switch
Lid Handle
Steam
Release Switch
Lid Handle
(WITHOUT INNER LID)
Pressure Release
Valve (underside)
Pressure
Float Valve
Release Valve
Center Knob
Float Valve
Rubber Gasket
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Power Quick Pot Y4D-36 and is the answer not in the manual?
Questions and answers
I need to replace 2- inner-lids for my 6qt Power Quick Pots. Where may I find them to purchase? Thanks!
I need to replace my ring/seal model # Y8D-36 where can I find this part
what size inner ring sealer to purchase for a 16 cup instant **** y8d-36 how many quarts is thi ****
The Tristar Products Power Quick Pot Y4D-36 has a capacity of 4 quarts. The size of the inner ring sealer is not specified in the provided information.
This answer is automatically generated
I **** unable to get the lid to seal
To fix the lid sealing issue on the Tristar Products Power Quick Pot Y4D-36, follow these steps:
1. Check the Inner Lid Rubber Gasket – Ensure it is properly installed, clean, flexible, and not torn. If it is damaged, replace it before using the unit.
2. Reinstall the Inner Lid Rubber Gasket – If not properly positioned, remove and reattach it securely.
3. Adjust the Lid Position – If the lid is not fully closed or positioned incorrectly, adjust it following the "ATTACHING LID" instructions in the manual.
4. Ensure the Correct Lid is Used – Non-pressure programs require the Glass Lid instead of the main lid.
5. Avoid Forcing the Lid Open – If the lid does not open or lock properly, unplug the unit and allow it to cool before attempting to adjust or remove the lid.
If the issue persists, contact Customer Service for further assistance.
This answer is automatically generated
Need to replace ring/seal inside of **** lid
To replace the ring/seal (Rubber Gasket) inside the lid of the Tristar Products Power Quick Pot Y4D-36:
1. Remove the Inner Lid: Pull the metal knob to detach the Inner Lid from the main lid.
2. Remove the Old Rubber Gasket: Carefully take out the existing Rubber Gasket from the Inner Lid.
3. Install the New Rubber Gasket:
- Place the Outer Gasket around the outer edge of the Inner Lid.
- Insert the Center Gasket into the center hole of the Inner Lid.
4. Ensure Proper Installation: Make sure the float valve and gasket are correctly positioned in the lid.
5. Reattach the Inner Lid: Secure the Inner Lid back into place before reassembling the lid.
Refer to the CHANGING THE INNER LID RUBBER GASKETS AND FLOAT VALVE ASSEMBLY section for further guidance.
This answer is automatically generated
whtat size inner ring to purchase for a 12 cups y8d-36 tristar products