Wear & Care - Charging The Sensor - BioTel Heart MCOT Patch Patient Manual

Wear & Care - Charging the Sensor
Charging The Sensor
The sensor must be charged
when the monitor alerts you
that the sensor battery is low.
• Locate the charger and
cable wire from your kit.
• Only use the supplied
charger to charge the
sensor.
• Insert sensor into charger
as shown in illustration.
• Insert the other end of the
cable into the wall charger,
and insert the wall charger
into a functioning outlet.
Video tutorials available at www.gobio.com/patients. For assistance, please call Customer Service at 1-866-426-4401.
gobio.com/patients
Keep the sensor plugged into
the charger until the unit is
fully charged and the light
turns green. It may take up to
90 minutes to fully charge the
sensor.
Charging
Fully Charged
27