Center Support Disassembly And Assembly - Suzuki Grand Vitara Manual

Center Support Disassembly and Assembly

Disassembly
1) Remove retaining ring.
Special tool
(A): 09920–76010
2) Pull out center support assembly (2) from planetary
sun gear (1).
3) Apply compressed air (400 – 800 kPa, 4 – 8 kg/cm
57 – 113 psi) to oil hole (1) at the extreme left and
measure movement of second coast brake (Second
coast brake) piston.
If measured value is not within standard range,
replace second coast brake plate or second coast
brake disc.
Standard second coast brake piston movement
0.75 – 1.35 mm (0.030 – 0.053 in.)
1
www.CarGarage.ir
S5JB0A5106084
IYSQ01510165-01
1
2
I5JB0A510117-01
I5JB0A510118-01
www.CarGarage.ir
Automatic Transmission/Transaxle:
4) Remove retaining ring.
5) After removing clutch backing plate (1), remove
second coast brake plate (3) and second coast
brake disc (2).
6) Using special tool and hydraulic press, compress
piston return spring and remove snap ring.
CAUTION
!
Be careful when applying pressure, for
overpressure will cause plate section of
piston return spring to deform.
2 ,
Special tool
(A): 09926–98310
7) Remove brake piston return spring (1).
5A-119
IYSQ01510168-01
1
2
3
I5JB0A510119-02
IYSQ01510170-01
IYSQ01510171-01