Radio-Controlled Watch - Bering RADIO-CONTROLLED Operating Instruction

EN

RADIO-CONTROLLED WATCH

CHANGING THE LCD DISPLAY
LCD Display - Adjustable by pressing the T1 button.
AUTOMATIC FUNCTIONS OF THE RADIO-CONTROLLED WATCH
Synchronisation precise to the second: at night at 2:00 and 3:00 am resp.
If both reception attempts do not lead to a definite synchronization, this is indicated in the reception control display as follows:
The days of non-reception are added up. During those days, your radio-controlled watch still runs very precisely on a quartz basis. The next
possible successful reception leads to a synchronisation, the reception indicator is set to '0' and the radio tower is displayed again. The
change to summer and wintertime also takes place at night at 2:00 and 3:00 am resp. A faulty reception may impede the successful change
to summer or wintertime, for example. Therefore, make sure to have unimpeded reception (possible sources of interference: telephone,
personal computer, TV, etc.).
BATTERY DISPLAY
The LCD serves as a display. The display of date and seconds alternates every second showing 'Lo'. In order to prevent damage by leaking
batteries, please have the battery changed within the following two weeks. Refer to the notes on restart after battery replacement so as to
.
reset your watch accurately to the second.
TIME ZONE SETTING
You can manually set the desired time zone in hourly steps.
1. Briefly press T2 once with a pointed object. The current hour is now shown in the LCD.
T2 T2
2. Further activation of T2 will first increase the hour indicator in the LCD, by one hour per each push. Set the hour according to the current
local time, the date may possibly be corrected automatically.
3. The hands will advance to the selected hour. The display on the LCD returns to the date display or seconds display.
4. In order to reset the time zone please perform a manual transmitter call.
CAUTION: the automatic synchronisation is deactivated if the time zone is behind or ahead by more than one hour. The re-
ception control display shows „-".
Hour
Minute
T1
T2