Table of Contents
Advertisement
Voice Service
Activating Voice Service
Voice recognition allows you to say commands to perform common functions
supported by your phone. There is no voice training required to use the voice
recognition feature. You simply say the pre-designated command displayed on
your screen in a normal tone of voice to perform the desired function.
To activate voice recognition:
1. Press
2. Select Tools.
3. Select Voice Service.
Tip: You can also activate Voice Service from standby mode by pressing and
holding the
4. Wait for the beep and then say one of the following commands:
•
Call
•
Send Message
When it recognizes one of these commands, the phone launches the associated
application. If the phone does not hear a command within approximately eight
seconds, it de-activates voice recognition without taking any action.
Using Voice Dial
Voice Dial allows you to dial any valid 7, 10, or 11 digit North American phone
number by speaking the number naturally, without pausing between the digits. It
also allows you to dial by pronouncing a name stored in your Contacts.
Tips for using Voice Dial:
•
Voice Dial works best in quieter environments.
•
When saying a number, speak at a normal speed and say each digit clearly.
There is no need to pause between digits.
•
The phone recognizes the digits one, two, three, four, five, six, seven, eight,
nine, zero, and oh. The phone does not recognize numbers such as "one
eight hundred" for "1-800." Instead, say "one-eight-zero-zero."
•
The phone recognizes only valid 7, 10, or 11 digit North American phone
numbers.
32 Voice Service
for Menu.
key.
•
Lookup
•
Go To
•
Check
Advertisement
Table of Contents
