Tumbl Trak Jr. Kip Bar Assembly & Instruction Manual

Hide thumbs

page of 3

/ 3
Bookmarks

Quick Links

Download this manual

Assembly Instructions

Jr. Kip Bar

Available

in Red or

Purple

Parts List

2 - End Cross Supports

2 - Uprights

NOTE: Tumbl Trak equipment is not recommended for

the use in Parkour/Free Running related activities.

Thank you for

purchasing the Jr. Kip

Bar. We hope you will

enjoy years of use of

this product.

After opening the

boxes, please check

the parts list to make

sure all pieces have

arrived in good

condition. If you have

any questions during

this assembly process,

please call

customer service

at 1-800-331-4362.

1 - Center Cross

Support

Troubleshooting tip:

Spray WD-40 on the

metal uprights for

ease of sliding the

bar up and down.

1 - Bar Assembly

Hardware Includes:

(2) D-2 Knobs

(1) Allen Wrench

(12) Set Screws

Need help?

Do you have a question about the Jr. Kip Bar and is the answer not in the manual?

Questions and answers

Summary of Contents for Tumbl Trak Jr. Kip Bar

Page 1: Assembly Instructions
1 - Bar Assembly 2 - Uprights 1 - Center Cross Support Hardware Includes: (2) D-2 Knobs (1) Allen Wrench (12) Set Screws NOTE: Tumbl Trak equipment is not recommended for the use in Parkour/Free Running related activities.
Page 2 Place the Center Cross Support and 2 End Cross Your new Jr. Supports parallel to each other on the floor (Fig. A). Kip Bar is easy to assemble! Slide one of the Uprights down into the tube of the Only 1 tool Center Cross Support.
Page 3 Accessories for the Jr. Kip Bar Accessories for the Jr. Kip Bar The following accessories can be purchased from Tumbl Trak’s website at www.tumbltrak.com or by calling 1-800-331-4362. Base Extensions • For increased stability for higher level skills or heavier athletes •...