Porta Phone COMSTAR User Manual

Operating Instructions

Com-Center Start:
Attach AC power cord to Com-Center,
l
then plug into the nearest wall outlet.
If wall outlet is not available insert
l
rechargable battery into slot at back of
Com-Center
(silver contacts must be in proper position)
OR use five brand name AA batteries in
l
battery sled
(provides up to 6 hours of operation)
Turn Com-Center ON
(switch on back panel)
l
Note:
If rechargeable battery and AC power
cord are used simultaneously, the battery will
receive a trickle charge while system is in use.
Com-Center Facts:
Line of Sight
For optimum range, position the Com-
l
Center so that the radio signals have a
clear path to the wireless headsets.
Conference Feature
Red & Green LED
l
lights indicate two
separate channels are
in use. Press Confer-
ence button for amber
LED so all coaches can
communicate.
Note:
Switch connects both channels,
and LED MUST be amber for systems of 5 or
more coaches.
Wireless Headset Start:
Insert battery into headset.
l
Headset will automatically
l
turn ON.
Note:
tom first, then press top to snap into place.
.
Push latch up to eject.
Blue LED Indications:
.
Blue LED blinks as headset searches for
l
. signal.
LED turns SOLID BLUE automatically
l
when headset senses the signal from the
Com-Center.
Solid blue LED
l
means headset is
communicating.
LED
Note:
ing, it means the headset is searching for the
signal. When the Com-Center is ON the head-
set LED will automatically change to solid blue
(indicating communication).
Slide battery into compartment bot-
When the wireless headset LED is blink-
Headset Controls:
Power Button
Subsequent to performing the headset
start-up procedure, the power button is
used to simply turn the headset on and
off.
OFF by pressing & holding untill LED
l
goes out.
ON by quick clicking, LED Illuminates.
l
Power
Button
Volume
Controls
MIC Mute
Button
Volume
Headset volume is set to middle level
l
upon power-up. Volume control buttons
adjust to any of five settings.
MIC Mute - grey button
Click MIC button to mute microphone,
l
audible tone confirms change.
Repetitive beep indicates headset bat-
l
tery low.