Installing Dvc Media 5.1 Program; Using The "Pc Camera" Function - Samsung VP-D200(i) Owner's Instruction Book

Digital video camcorder
Hide thumbs Also See for VP-D200(i):
Table of Contents

Advertisement

USB interface (VP-D230(i)/D250(i)/D270(i) only)

Installing DVC Media 5.1 Program

DVC Media 5.1 User's Manual is included on the accompanying CD(D:\help\) in adobe's Portable Document Format(PDF)
The user's manual can be viewd using Acrobat Reader software, which is also included on the CD.
(The Acrobat Reader is a freeware product of AdobeSystems,Inc.)
Do not connect the camcorder to PC before installing the program.
If another camera or scanner is connected, please disconnect it in advance.
This explanation is based on Windows
Program installation
1. Insert the software CD into CD-ROM drive.
- Installation selection screen appears in the monitor.
2. If the installation selection screen does not appear after inserting the CD
click "Run" on the Windows "Start" menu and execute SETUP.EXE file to begin installation.
- When CD-ROM drive is set to "D:drive", type "D:\setup.exe" and press Enter.
3. Click the icons listed below to install the selected software.
(The program automatically check and install the driver which the PC is needed)
DVC Driver: USB removable Disk Driver (Windows
USB PC CAMERA Driver
USB Streaming Driver
DVC Media 5.1
DirectX 9.0a
Windows Media Player 9.0
Editing Software

Using the "PC camera" function

You can use this camcorder as a PC CAMERA.
When you connect to a Web site that can provide video chatting functions, you can use your camcorder for such functions.
When you use the voice input at video chatting (or net-meeting) function, connect the external microphone to the soundcard of PC.
Using the camcorder with PC installed Net-meeting program, you can conduct video conference.
The screen size of PC CAMERA is 160
If PC is connected with the USB to the camcorder, the buttons which except the POWER SWITCH, MODE SWITCH,
ZOOM SWITCH, and NIGHT-CAPTURE SWITCH are not operated.
1. Set the mode switch to Tape, set the power switch to CAM.
2. Connect one end of the USB cable to the USB jack on the camcorder and the other end to the USB connector on your computer.
®
98SE OS.
®
98SE only)
120 Pixel.
ENGLISH
3.
81
81

Advertisement

Table of Contents
loading

Table of Contents