Alliance Laundry Systems DCG020ND Installation, Operation And Maintenance Manual
  1. Manuals
  2. Brands
  3. Alliance Laundry Systems Manuals
  4. Washer
  5. DCG020ND
  6. Installation, operation and maintenance manual

Alliance Laundry Systems DCG020ND Installation, Operation And Maintenance Manual

Washer-extractors cabinet hardmount
Hide thumbs Also See for DCG020ND:
Table of Contents

Advertisement

Quick Links

Washer-Extractors
Cabinet Hardmount
Design 4 Models
Refer to Page 8 for Model Identification
Original Instructions
Keep These Instructions for Future Reference.
CAUTION: Read the instructions before using the machine.
(If this machine changes ownership, this manual must accompany machine.)
Part No. F8619501ENR4
www.alliancelaundry.com
August 2018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DCG020ND and is the answer not in the manual?

Questions and answers

Bill Brown
February 26, 2025

Error code ordEr

User image 67bf3aa0e1274
0
Ron Lowman
April 17, 2025

Can you tell me what each cycle number mean - 1,2,3,4,5,6,7,8,9 on the keypad on the Q control model

0

Related Manuals for Alliance Laundry Systems DCG020ND

Summary of Contents for Alliance Laundry Systems DCG020ND

  • Page 1 Washer-Extractors Cabinet Hardmount Design 4 Models Refer to Page 8 for Model Identification Original Instructions Keep These Instructions for Future Reference. CAUTION: Read the instructions before using the machine. (If this machine changes ownership, this manual must accompany machine.) Part No. F8619501ENR4 www.alliancelaundry.com August 2018...

  • Page 3: Table Of Contents

    Circuit Breakers and Quick Disconnects............72 © Copyright 2018, Alliance Laundry Systems LLC All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.
  • Page 4 Beginning of Day..................105 End of Day....................105 Monthly..................... 105 Yearly......................106 Care of Stainless Steel................. 108 Disposal of Unit...................109 China Restriction of hazardous substances (RoHS)......110 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 5: Models With Wireless Board Installed

    20cm from all person and not be co-located with any other transmitters except in accord- ance with FCC and Industry Canada multi-transmitter product procedures. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 6: Safety Information

    Install the washer according the INSTALLATION instruc- warnings or precautions. To reduce the risk of poisoning or tions. Refer to the EARTH/GROUND instructions in the IN- © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 7: Safety Decals

    Operator Safety washer. Any problems or conditions not understood should be reported to the dealer, distributor, service agent or the manufacturer. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 8 Do not bypass any safety devices in the machine. WARNING Operating the machine with severe out-of-balance loads could result in personal injury and serious equipment damage. W728 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 9: Introduction

    HCT020WE HCU020WT HCD020NE HCE020NT HCG020WD HCH020WT HCL020WH HCT020WF HCU020WV HCD020NF HCE020NV HCG020WE HCH020WV HCL020WX HCT020WH HCU020WX HCD020NH HCE020NX HCG020WF HCH020WX HCT020FN HCT020WL HCU020WY Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 10 SCT020WH UCA020FN UCD020NN UCG020QN UCE020FN UCK020NN UCT020QN UCU020NN UCA020NN UCD020QN UCH020FN UCJ020FN UCK020QN UCU020FN UCA020QN UCG020FN UCH020NN UCJ020NN UCT020FN UCU020QN UCD020FN UCG020NN UCH020QN UCJ020QN UCT020NN © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 11 HCT030WE HCU030WT HCD030NE HCE030NT HCG030WD HCH030WT HCL030WH HCT030WF HCU030WV HCD030NF HCE030NV HCG030WE HCH030WV HCL030WX HCT030WH HCU030WX HCD030NH HCE030NX HCG030WF HCH030WX HCT030FN HCT030WL HCU030WY Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 12 SCT030WH UCA030FN UCD030NN UCG030NN UCH030QN UCK030NN UCT030QN UCU030QN UCA030NN UCD030QN UCG030QN UCJ030FN UCK030QN UCU030FN UCA030QN UCE030FN UCH030FN UCJ030NN UCT030FN UCU030NN UCD030FN UCG030FN UCH030NN UCJ030QN UCT030NN © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 13 HCH040NH HCJ040NQ HCT040NL HCT040WT HCU040WY HCE040FN HCG040NE HCH040NL HCJ040NT HCT040NQ HCT040WV HCE040NC HCG040NF HCH040NQ HCJ040NV HCT040NT HCT040WY HCE040ND HCG040NH HCH040NT HCJ040NX HCT040NV HCU040FN Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 14 SCH040WT SCK040WD SCL040WV SCT040WH UCA040FN UCE040FN UCG040QN UCH040QN UCJ040QN UCT040FN UCU040FN UCA040NN UCG040FN UCH040FN UCJ040FN UCK040NN UCT040NN UCU040NN UCA040QN UCG040NN UCH040NN UCJ040NN UCK040QN UCT040QN UCU040QN © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 15 HCH060NH HCJ060NQ HCT060NL HCT060WV HCU060WY HCE060FN HCG060NE HCH060NL HCJ060NT HCT060NQ HCT060WX HCE060NC HCG060NF HCH060NQ HCJ060NV HCT060NT HCT060WY HCE060ND HCG060NH HCH060NT HCJ060NX HCT060NV HCU060FN Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 16 SCH060WT SCK060WD SCL060WV SCT060WH UCA060FN UCE060FN UCG060QN UCH060QN UCJ060QN UCT060FN UCU060FN UCA060NN UCG060FN UCH060FN UCJ060FN UCK060NN UCT060NN UCU060NN UCA060QN UCG060NN UCH060NN UCJ060NN UCK060QN UCT060QN UCU060QN © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 17 SCT080WQ SCU080WQ SCA080WV SCG080WV SCH080WV SCK080NQ SCT080NT SCT080WV SCU080WV SCA080WX SCG080WX SCH080WX SCK080NT SCT080NQ SCT080WX SCU080WX SCA080WY SCG080WY SCH080WY SCK080NV SCT080NV SCT080WY SCU080WY Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 18 Introduction 80 Models UCA080FN UCG080FN UCH080FN UCJ080FN UCK080NN UCT080NN UCU080NN UCA080NN UCG080NN UCH080NN UCJ080NN UCK080QN UCT080QN UCU080QN UCA080QN UCG080QN UCH080QN UCJ080QN UCT080FN UCU080FN © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 19 SCT100WQ SCU100WQ SCA100WV SCG100WV SCH100WV SCK100NQ SCT100NT SCT100WV SCU100WV SCA100WX SCG100WX SCH100WX SCK100NT SCT100NQ SCT100WX SCU100WX SCA100WY SCG100WY SCH100WY SCK100NV SCT100NV SCT100WY SCU100WY Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 20 Introduction 100 Models UCA100FN UCG100FN UCH100FN UCJ100FN UCK100NN UCT100NN UCU100NN UCA100NN UCG100NN UCH100NN UCJ100NN UCK100QN UCT100QN UCU100QN UCA100QN UCG100QN UCH100QN UCJ100QN UCT100FN UCU100FN © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 21: Delivery Inspection

    Alliance Laun- dry Systems at +1 (920) 748-3950 for the name and address of the nearest authorized parts distributor. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 22: Specifications And Dimensions

    [mm] Height of door opening above 17.0 [432] 17.0 [431] 17.7 [451] 18.1 [460] 21.7 [551] 21.7 [551] floor, in. [mm] Table 1  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 23 5.79 [2.63] 6.84 [3.10] 10°F/lbs. [10°C/kg] Average consumption per cy- 0.78 [59] 0.98 [75] 1.34 [102] 1.58 [120] cle, BHP [kgf m] Table 1  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 24 HIGH 2.368 3.693 2.394 3.269 2.643 3.031 10°F [5.5°C] Noise Emissions Wash Extract (100G) 56 Extract (200G) 61 N/A = Not Applicable Table 1 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 25: Machine Dimensions

    Specifications and Dimensions Machine Dimensions Front View CHM2563N_SVG Figure 2 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 26 26.0 [660] 29.0 [737] 30.6 [777] 34.1 [866] 41.5 [1054] 41.5 [1054] 1.1 [28] 1.1 [28] 1.1 [28] 1.1 [28] 1.1 [28] 1.1 [28] Table 2 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 27 Specifications and Dimensions Side View CHM2564N_SVG Figure 3 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 28 9.3 [236] 9.3 [236] 9.3 [236] 9.3 [236] 9.3 [236] Door width 16.75 [426] 19.38 [492] 21.75 [552] 21.75 [552] 25.25 [641] 25.25 [641] Table 3 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 29 5. Compartment Cold Fill Valve 6. Compartment Hot Fill Valve 7. Cold Hard Water Valve or 3rd Water Inlet 8. Pump Drain View Figure 4 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 30 2.0 [51] 2.0 [51] 18.1 [460] 21.1 [536] 20.7 [526] 23.7 [602] 23.1 [587] 26.1 [663] 39.4 [1001] 41.4 [1052] 35.6 [904] 37.5 [953] Table 4 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 31 6. Compartment Cold Fill Valve 7. Compartment Hot Fill Valve 8. Cold Hard Water Valve or 3rd Water Inlet 9. Pump Drain View Figure 5 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 32 40.3 [1024] 38.0 [965] 4.5 [114] 8.8 [224] 17.0 [432] 2.0 [51] 22.8 [579] 25.4 [645] 27.7 [704] 39.7 [1008] 43.6 [1107] 39.7 [1008] Table 5 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 33 6. Tub Hot Fill Valve 7. Steam Valve 8. Compartment Cold Fill Valve 9. Compartment Hot Fill Valve 10. Cold Hard Water Valve or 3rd Water Inlet Figure 6 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 34 46.3 [1176] 52.6 [1336] 52.6 [1336] 42.4 [1077] 49.7 [1262] 49.7 [1262] 46.3 [1176] 53.6 [1361] 53.6 [1361] 42.4 [1097] 49.7 [1262] 49.7 [1262] Table 6 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 35: Mounting Bolt Hole Locations - 20 And 30 Models

    Mounting Bolt Hole Locations – 20 and 30 Models 20-30 Models (refer to Table 7 ) CHM2609N_SVG 1. Elevated Base Width 2. Front of Mounting Bolt Template 3. Machine Width Figure 7 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 36 0.113 [3] 0.188 [5] 23.938 [608] 28.938 [735] 24.69 [627] 29.69 [754] 27.95 [710] 32.38 [597] 26 [660] 29 [737] 0.641 [16] 0.641 [16] Table 7 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 37: Mounting Bolt Hole Locations - 40 And 60 Models

    Mounting Bolt Hole Locations - 40 and 60 Models 40 and 60 Models (refer to Table 8 ) 1. Elevated Base Width 2. Front of Mounting Bolt Template 3. Machine Width Figure 8 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 38 1.187 [30] 1.25 [32] 32.5 [826] 36 [914] 33.54 [852] 36.87 [699] 37.36 [949] 40.7 [1034] 30.6 [777] 34.1 [866] 0.614 [16] 0.641 [16] Table 8 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 39: Mounting Bolt Hole Locations - 80 And 100 Models

    “A”. For multiple machines installed side by side with minimum clearance, use the inside bolt holes marked “B”. 1. Front of Mounting Bolt Template Figure 9 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 40 4 [102] 4 [102] Outside 42.72 [1085] 42.72 [1085] Inside 35.43 [900] 35.43 [900] Outside 52.86 [1342] 52.86 [1342] Inside 47.16 [1197] 47.16 [1197] Table 9 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 41: Installation

    Figure 18 and Figure 19 . If the slab does not meets these re- quirements and an elevated base frame is desired, refer to Figure 21 . Proceed to Machine Mounting and Grouting. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 42: Foundation And Pad Installation

    [64 mm] into the existing floor. The reinforcing should gineer. Alliance Laundry Systems stands behind all in- be 12 inches [305 mm] on center each way around entire pe- stallations meeting these specifications. For alternate rimeter.

  • Page 43: Floor Layout And Pad Dimensions

    2.51 [64] 2.81 [71] 5.18 [131] edge of pad (minimum) Length of pad (minimum) 34.8 [884] 39.5 [1003] 43.5 [1105] 50.6 [1285] Table 11  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 44 Dimensional Clearances - Side-by-Side Mount - 20-60 Pound [9.1-27.2 Kg] Models, in. [mm] Description Distance to wall (minimum) 24 [610] 24 [610] 24 [610] 24 [610] Table 12  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 45 Width of pad (minimum) 57.54 [1462] 63.52 [1613] 67.38 [1711] 78.98 [2006] Side clearance between ma- .5 [13] .5 [13] .5 [13] .5 [13] chines Table 12 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 46 5.26 [134] 6.19 [157] 8.9 [226] edge of pad (minimum) Length of pad (minimum) 88.63 [2251] 98.37 [2499] 115.23 [2927] 119.48 [3035] Table 13  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 47 14 ) CHM2519N_SVG 1. Wall 2. Rear Edge of Pad 3. Side Edge of Pad 4. Machine 1 5. Front Edge of Pad Figure 14 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 48 Distance of machine base to edge of pad (minimum) 8 [203] Length of pad (minimum) 49.2 [1250] Width of pad (minimum) 57.5 [1461] Table 14 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 49 Distance to wall (minimum) 24 [610] Adjacent unit spacing (minimum) 6 [152] Length of pad (minimum) 49.2 [1250] Width of pad (minimum) 99.5 [2527] Table 15 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 50 10.38 [264] Length of pad (minimum) 49.2 [1250] Width of pad (minimum) 99.5 [2527] IMPORTANT: When close mounting, bolt machine using inside bolt holes. Table 16 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 51 Back-to-Back Mount - 80 and 100 Pound [36.3 and 45.4 Kg] Models, in. [mm] Description 80-100 Adjacent rear spacing (minimum) 33.3 [846] Table 17  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 52 8 [203] 8 [203] 8 [203] 8 [203] 12 [305] vation Depth V-speed 8 [203] 8 [203] 12 [305] 12 [305] 15 [381] Table 18 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 53: Foundation Requirements

    New Monolithic Floor (refer to Table 20 ) PHM981N_SVG 1. Edge of Pad 2. 3500 PSI (minimum) Concrete 3. Compacted Fill (minimum 6 in. [152 mm] beneath machine) Figure 19 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 54 6 [152] Total depth of foundation (con- 8 [203] 8 [203] 12 [305] 15 [381] crete plus 6 in. [152 mm] fill) (minimum) Table 20 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 55 15 [381] crete plus 6 in. [152 mm] fill) (minimum) Required thickness of existing 4 [102] 4 [102] 6 [152] 6 [152] floor (minimum) Table 21 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 56 12 [305] bars (minimum) Length of reinforcing bar ex- 2.5 [64] 2.5 [64] 2.5 [64] 2.5 [64] tending into existing floor (mini- mum) Table 22 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 57: Machine Mounting And Grouting

    Grout completely under frame. Remove front panel and back panel to gain access to entire perimeter of base plates. Force grout under base until all voids are filled. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 58 Cast-in-place Anchors (refer to Table 23 ) CHM2438N_SVG 1. Machine Frame Base 2. Grout 3. Anchor Bolt (minimum Grade 5 SAE rating) 4. Concrete 5. Edge of Pad Figure 23 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 59 4330 [5.87] chine base, lbs.-ft. [kN-m] Maximum vertical load, lbs. 800 [3.56] 1130 [5.03] 1460 [6.49] 2060 [9.16] 3090 [13.75] 3160 [14.06] [kN] Table 24 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 60: Drain Connection Requirements

    1. Rear of Machine 2. Drain Pipe 3. Steel Grate 4. Drain Trough 5. Strainer 6. Waste Line 7. 1 in. [25 mm] minimum gap Figure 24 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 61 5.7 [161] 8.0 [221] 9.5 [269] * Also works with 3 inch OD PVC pipe if connected to inside of drain tee connector. Table 25 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 62: Water Connection Requirements

    18.5 [70] [l/min at 1232 Pa] 80-100 23.0 [87] Extra water inlet flow, gal/min 20-100 5.2 [20] at 85 psi [l/min at 1232 Pa] Table 26 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 63 Table 27 Suitable air cushions (risers) should be installed in supply lines to prevent “hammering.” Refer to Figure 26 . Alliance Laundry Systems, LLC ranges of front loading commer- PHM831N_SVG cial clothes washing machines have solenoid valves at the inlets.

  • Page 64: Connect Inlet Hoses (20-40 Models)

    If additional hose lengths are needed or using hoses other than those supplied by manufacturer, flexible hoses with screen filters are required. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 65 If additional hose lengths are needed or using hoses other than those supplied by manufacturer, flexible hoses with screen filters are required. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 66: Plumbing Diagrams

    Installation Plumbing Diagrams 20-60 Models - Side View (refer to Table 28 ) Figure 31 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 67 Installation 20-60 Models - Rear View (refer to Table 28 ) CHM2641N_SVG 1. Vacuum Breaker Overflow Figure 32 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 68 33.9 [861] 35.8 [909] 38.0 [965] Vaccum breaker overflow centerline 35.5 [902] 37.5 [953] 39.7 [1008] Inlet Valves 38.9 [988] 41.4 [1052] 43.2 [1097] Table 28 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 69 Installation 60-100 Models - Side View (refer to Table 29 ) Figure 33 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 70 Installation 60-100 Models - Rear View (refer to Table 29 ) 1. Vacuum Breaker Overflow Figure 34 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 71: Electrical Installation Requirements

    Only qualified personnel should attempt adjustments and troubleshooting. Disconnect power from the ma- IMPORTANT: Alliance Laundry Systems warranty does chine before removing any cover and guards, and not cover components that fail as a result of improper before attempting any service procedures.

  • Page 72: Input Power Conditioning

    North American Approval and CE Approval sections for model- specific circuit breaker requirements. IMPORTANT: All quick disconnects should comply with the specifications. DO NOT use fuses instead of circuit breakers. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 73: Single-Phase Connections

    Standard IEC 60335-1, clauses 24.3 and 22.2. Gap is defined as the minimum contact sepa- ration of each pole in the switch between the “ON” and “OFF” positions. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 74: Grounding

    Do not connect customer power or customer load to the Internal Load Distribution ter- minal block. Refer to the machine electrical schemat- ic for details. W759 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 75: North American Approval

    50- 60 Electric Heat V-Speed Models 200-240 200-240 200-240 50- 60 Electric Heat 200-240 50- 60 Standard 380-415 50- 60 Electric Heat Table 31  continues... © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 76 Installation 20 Models - North American Approval Voltage Designation Specifications Standard 440-480 50- 60 Electric Heat Table 31 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 77 V-Speed Models 200-240 200-240 200-240 50- 60 Electric 200-240 50- 60 Heat Standard 380-415 50- 60 Electric Heat Standard 440-480 50- 60 Electric Heat Table 32 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 78 200-240 200-240 200-240 50- 60 Electric 200-240 50- 60 10.0 Heat Standard 380-415 50- 60 Electric Heat Standard 440-480 50- 60 Electric Heat Table 33 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 79 V-Speed Models 200-240 50- 60 11/7 Electric 200-240 50- 60 10.0 Heat Standard 380-415 50- 60 Electric Heat Standard 440-480 50- 60 Electric Heat Table 34 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 80 20/15 12/14 4/2.5 Electric 200-240 50- 60 25.0 Heat Standard 380-415 50- 60 Electric 10.0 Heat Standard 440-480 50- 60 Electric 10.0 Heat Table 35 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 81 20/15 12/14 4/2.5 Electric 200-240 50- 60 25.0 Heat Standard 380-415 50- 60 Electric 10.0 Heat Standard 440-480 50- 60 Electric 10.0 Heat Table 36 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 82: Ce Approval

    Electric Heat 440-480 50-60 V-Speed Models 200-240 200-240 200-240 50-60 Electric Heat 200-240 50-60 17- 20 Standard 380-415 50-60 Electric Heat 440-480 50-60 Table 37 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 83 50-60 V-Speed Models 200-240 10/6 200-240 10/6 200-240 50-60 10/6 Electric Heat 220-240 50-60 17- 20 Standard 380-415 50-60 Electric Heat 440-480 50-60 Table 38 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 84 10/6 200-240 10/6 200-240 50-60 10/6 Electric Heat 200-240 50-60 33- 39 10.0 Standard 380-415 50-60 Electric Heat Standard 440-480 50-60 Electric Heat Table 39 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 85 V-Speed Models 200–240 50-60 11/7 16/ 10 Electric Heat 200-240 50-60 33- 39 10.0 Standard 380-415 50-60 Electric Heat Standard 440-480 50-60 Electric Heat Table 40 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 86 200-240 50-60 17/ 11 20/ 16 Electric Heat 200-240 50-60 59- 70 16.0 Standard 380-415 50-60 Electric Heat Standard 440-480 50-60 Electric Heat Table 41 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 87 200-240 50-60 17/ 11 20/ 16 Electric Heat 220-240 50-60 59- 70 16.0 Standard 380-415 50-60 Electric Heat Standard 440-480 50-60 Electric Heat Table 42 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 88: Steam Requirements (Steam Heat Option Only)

    The chemical supply connector is located on the back right-hand side of the machine. There are 12 chemical ports on the connec- © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 89 Connection for Chemical Supply Hoses (refer to Figure 42 for detail of chemical supply connector) C-CHM1N1_SVG1 1. Chemical Supply Connector 2. External Liquid Supply Connection Ports (12) Figure 41 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 90 NOTE: A flush manifold system can only be connected through the top 6 ports (boxed). 1. 3/4 inch port, O.D. 2. 1/2 inch port, O.D. 3. 3/8 inch port, O.D. Figure 42 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 91: External Supplies

    © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 92: Chemical Injection Using External Ac Power Source

    NOTE: An External AC Power Source is NOT provided by Alliance Laundry Systems. NOTE: Power for external supplies must not be derived from the high-voltage main power connection point. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 93: External Supply Signals

    Figure 49 control. Refer to Figure 49 for Internal Supply Connection or and Figure 51 for External AC Connection. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 94 1. ES1 Power supply 2. K12 Contact 3. Supply 1 Signal Figure 50 1. ES1 Power supply 2. K12 Contact 3. Supply 1 Signal Figure 51 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 95: Start Up

    1. If rotation is not counter clockwise, disconnect power to ma- chine. 2. Have a qualified electrician reverse any two motor leads at the motor. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 96: Operation

    4. Close the door and turn handle counter clockwise. Refer to Figure 54 . © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 97: Opl Control Instructions

    5. When a cycle is complete, the control displays 00. 5. When a cycle is complete, the control displays OPEN DOOR. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 98 3. Press the START (enter) keypad to select. NOTE: Cycles cannot be changed anytime after the machine is started. 4. When a cycle is complete, the control displays OPEN DOOR. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 99: Vend Control Instructions

    6. When a cycle is complete, the control displays OPEN DOOR. 6. When a cycle is complete, the control displays OPEN DOOR. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 100: Dcj, Sch And Sct Models With N And W Controls

    Fill Step. After the first Fill Step, all cycle key- pad presses are ignored. 7. When a cycle is complete, the control displays OPEN DOOR. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 101: Hca, Hcd, Hce, Hch, Hcj And Hcu Models With N And W Controls

    Fill Step. After the first Fill Step, all cycle key- pad presses are ignored. 6. When a cycle is complete, the control displays OPEN DOOR. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 102: Sct Modles With Q Control

    5. When a cycle is complete, the control displays OPEN DOOR. pad presses are ignored. 5. When a cycle is complete, the control displays OPEN DOOR. HCT Models with Q Control © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 103: Adding Supplies

    CHM2228N_SVG 1. Liquid Detergent 2. Powder Detergent b. BLEACH CHM2229N_SVG CHM2230N_SVG 3. Liquid Bleach 4. Powder Bleach c. SOFTENER CHM2231N_SVG 5. Liquid Softener Table 44 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 104: Emergency Stop Button (Opl Models Only)

    1. Press red emergency stop button to stop all action. 2. To restart the machine, pull red emergency stop button out and press START (enter) on the control. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 105: Maintenance

    If water does not leak out quired after disconnecting power. during the first wash segment, the drain valve is closed and functioning properly. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 106: Yearly

    Lubricate the barings each month or after every 200 hours of operation. Visually inspect grease line for air pock- ets, purging air pockets as necessary. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...
  • Page 107 Replace belt and retighten eyebolt top nut back to jam nut position. Re- fer to Figure 66 . IMPORTANT: All torque joints must remain dry (non-lubricated). © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 108: Care Of Stainless Steel

    IMPORTANT: All torque joints must remain dry (non- lubricated). 11. Every 5 years replace inlet hoses, hose screens, belt, and fan filter (if applicable). © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 109: Disposal Of Unit

    MIX1N_SVG Figure 67 © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

  • Page 110: China Restriction Of Hazardous Substances (Rohs)

    NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal oper- ating use conditions of the product such as temperature and humidity. This product under normal use, durable years of environmental protection is 15 years. © Copyright, Alliance Laundry Systems LLC - Part No. F8619501ENR4 DO NOT COPY or TRANSMIT...

This manual is also suitable for:

Dcj020 seriesHcg020 seriesHcd020 seriesHca020 seriesHch020 seriesHcj020 series ... Show all

Table of Contents

Save PDF