Table of Contents
Advertisement
(254PO) SPA ENGLISH 7.5" X 10.3" PANTONE 295U 05/12/2017
254
English
PO
PARTS
Before assembling your product, please take a few minutes to check the contents
and become familiar with all the parts.
20
19
14
13
12
24
17
15
16
18
6
26
4
3
B
C
A
27
2
29
11
10
8
28
22
23
1
9
5
30
25
7
NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.
Page 5
S AVE THESE INSTRUCTIONS
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PureSpa SSP-H-10-2 and is the answer not in the manual?
Questions and answers
How fo inflat
To inflate the Intex PureSpa SSP-H-10-2:
1. Insert one end of the inflation hose into the outlet and turn it to the right to lock it.
2. Unscrew the air valve cap to reveal the valve stem in the up position.
3. Insert the other end of the inflation hose into the valve and turn it to the right to lock it.
4. Press the power button to turn on the control unit panel.
5. Press the inflation button to inflate the spa tub wall for 8 to 10 minutes until it is firm but not hard.
6. Press the button again to turn it off.
7. Replace the air valve cap by screwing it back on. Do not use force.
Do not overinflate or use a high-pressure air compressor.
This answer is automatically generated
How does it inflation the tub
The Intex PureSpa SSP-H-10-2 inflates the tub using an inflation/deflation valve that includes an air pressure release function. This valve automatically releases excess air when the internal pressure reaches between 1.5 - 2.5 psi (0.103 - 0.172 bar) to prevent over-inflation. The spa control unit is connected to the tub and hand-tightened during setup to manage inflation.
This answer is automatically generated