Support And Transport Options - ns design CR Series Instructions

POLAR™ PICKUP SYSTEM - The CR Series Upright Bass features the Polar bridge-mounted piezo
pickup system. This system can sense either vertical or lateral string vibration. Set in the vertical mode,
plucked notes are remarkably even and sustained. In the lateral mode, the pickup has unparalleled
sensitivity in the direction of the bow, with more attack when plucked.
EMG MAGNETIC PICKUPS (CR4M and CR5M) - The low-impedance EMG pickups incorporate
individually-adjustable coils and neodymium magnets. Each coil is buffered separately for a full sound
quality with very low noise, producing a smooth pizzicato tone not unlike an electric bass guitar.
(Magnetic pickups are not recommended for bowing.)
ACTIVE EQ AND MIXER - Active EMG 18-volt pre-amp, mono output. The dual mode preamp allows the
player to choose between two very distinct tone qualities. The first mode delivers the full frequency
response of modern low impedance electronics, for a rich, full-blown "electric" sound. The second is
balanced to produce the frequency response of the traditional upright bass, for a more "acoustic" sound.
The 18 volt power supply ensures plenty of reserve overhead for full dynamics.
CONSTRUCTION - Straight grain solid rock maple body, neck and peghead, with a flame maple face on
body and peghead. Traditional amber stain with polymer topcoat. The neck has a traditional profile.
ADJUSTABLE BRIDGE - Hard maple, radius 7.9 cm (3.1"); string spacing 9.3 cm (3.66"). This allows
the instrument to be set up to meet the requirements of many different playing styles.
TUNING MACHINES - Schaller 20:1 ratio, fully-encased worm gear tuners, black finish.
TRUSS ROD - Powerful truss rod allows proper relief adjustment to provide optimal action.
STRINGS - Compatible with most conventional upright bass strings. NS 610 Electric upright bass strings
by D'Addario standard.
DIMENSIONS
LENGTH
LENGTH
THICKNESS
SCALE LENGTH 106 cm (41.73")

SUPPORT AND TRANSPORT OPTIONS

Tripod Stand - Steel and aluminum fully adjustable, self-standing tripod design. Supplied as standard
equipment, the Tripod Stand provides stable support, with full height and tilt adjustment. Folds for easy
storage and fits in gig bag.
End Pin Stand - An optional Bass End Pin Stand offers the player a more traditional position, similar to
that of an acoustic instrument. The End Pin Stand Conversion Kit attaches to the tripod stand to hold the
instrument upright for on-stand performance or when not in use.
FRAME Strap System - A light frame structure is supported by a single guitar style strap extending over
the left shoulder. This holds the bass in the correct position for both pizzicato and arco styles. With the
strap system you can achieve full mobility with amazing comfort. Black-dyed ash frame.
Padded Gig Bag - Standard, the padded gig bag is only 137 cm (54") long, 18 cm (7") in diameter. 8.2
kg (18 Ib) loaded weight, including tripod stand, handle and shoulder strap. Outer storage pockets provide
room for accessories.
Flight Case - An optional hardshell flight case, measures 145 cm (57") long, 25 cm (10") wide., 25 cm
(10") high; 22 kg (48 Ib) loaded weight, including stand.
Features and specifications subject to change without notice.
132 cm (52")
132 cm (52")
10 cm (4")
WIDTH
WIDTH
WEIGHT (instrument only)
WEIGHT (w/ stand & gig bag)
15 cm (6")
15 cm (6")
4.8 kg (10.5 lbs)
8.2 kg (18 lbs)