Icop VDX-6318 Getting Started Manual page 105


From the Exit Options menu, use the Up/Down Arrow key to select the Load FailSafe
Defaults option and press Enter

When the "Load Failsafe Defaults?" screen pop up, select OK and press Enter

From the Exit Options menu, use the Up/Down Arrow key to select the Load Optimal
Defaults option and press Enter

Press F10 to save the settings and exit BIOS configuration mode
VDX-6318 BIOS Settings to Support Compact 7
To support Windows Embedded Compact, the SBC's BIOS requires the following configuration:

The "OnBoard IDE Operate Mode" setting, from the IDE Configuration menu, need to be
configured to "Native Mode".
In addition to the above, check to make sure the 1
configured to boot from the intended storage device.
Here are the steps to configure the "OnBoard IDE Operate Mode":

Enter BIOS configuration mode (Press the Del key during power on)

After entering BIOS configuration, use the Left/Right Arrow key to navigate to the
Advanced Settings menu

From the Advanced Settings menu, use the Up/Down Arrow key to select the IDE
Configuration option and press Enter

From the IDE Configuration menu, use the Up/Down Arrow key to select the OnBoard IDE
Operate Mode option and press Enter

From the Options menu, use the Up/Down Arrow key to select Native Mode and press
Enter

Press F10 to save the settings and exit BIOS configuration mode
Windows Embedded Compact 7 Getting Started Rev 2.00
VDX-6318 Windows Embedded Compact 7 - Getting Started Guide
st
Boot Device, from the Boot Settings menu, is
Page 105