Charging The Battery And Turning On Your Camera; Charging The Battery; Turning On Your Camera - Samsung PL120 User Manual
Samsung digital camera user manual
Hide thumbs
Also See for PL120:
- User manual (126 pages) ,
- User manual (124 pages) ,
- Service manual (100 pages)
Table of Contents
Advertisement
Charging the battery and turning on your camera
Charging the battery
Before you use the camera for the first time, you must charge the
battery. Attach the USB cable to the AC adapter, and then plug
the end of cable with the indicator light into your camera.
Indicator light
•
•
•
Red: Charging
Orange: Error
Green: Fully charged
Turning on your camera
Press [POWER] to turn your camera on or off.
•
The initial setup screen appears when you turn on the camera
for the first time. (p. 18)
Turning on your camera in Playback mode
Press [P]. The camera turns on and immediately accesses
Playback mode.
If you turn on your camera by pressing and holding [P] for about 5 seconds,
the camera does not emit any sounds.
17
Basic functions
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PL120 and is the answer not in the manual?
Questions and answers
I'm unable to use the smart filter effect (options are greyed out), how do i fix this?
The Samsung PL120's smart filter effects may be greyed out if certain camera settings or modes are active. To fix this issue, try the following steps:
1. Check the Shooting Mode – Ensure the camera is not in an automatic or restricted mode that disables smart filters. Switch to Program or a similar mode that allows filter effects.
2. Verify Image Quality Settings – Some smart filters may not be available in certain resolutions or aspect ratios. Try adjusting the image size or format.
3. Disable Other Image Processing Features – Features like face recognition or digital zoom might interfere with the availability of smart filters. Turn them off and check again.
4. Use Playback Editing – If filters are unavailable while shooting, apply them in playback mode where you can edit pictures directly.
If the issue persists, resetting the camera to factory settings might help restore all available features.
This answer is automatically generated