Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ryobi RLM30
Summary of Contents for Ryobi RLM30
- Page 1 ORIGINAL INSTRUCTIONS Laser Distance Measurer RLM30...
- Page 2 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications.
-
Page 3: General Safety Warnings
Safety directly into the laser. GENERAL SAFETY WARNINGS Warning: Be sure to read and understand all instructions in the manual before using this product. Failure to follow all instructions Do not remove or deface any product may result in hazardous radiation labels. - Page 4 Safety product should be performed only by beam and result in inaccurate measurements. authorised service personnel. ■ When the laser distance measurer is Warning: Do not operate the brought into a warm environment from tool in explosive or combustible very cold conditions, or vice versa, areas, such as in the presence of allow it to come to the surrounding flammable liquids, gases or dust.
-
Page 5: Intended Use
Safety not expect. If the lens has moved, FEATURES measurement may be impossible or inaccurate. FUNCTIONS OF KEYS Battery tool use and care Measure/Measure ■ Replace the batteries when the (continuous) battery indicator shows empty. Make sure to install the batteries with correct polarity. -
Page 6: Operation
Safety ADDING MEASUREMENTS Minimum display See page 7. 1. Take a measurement. 2. Press 3. Press to take the next measurement. Subtract The sum of the measurements is displayed. Unit (meter) Repeat steps 2-3 to add another measurement. GETTING STARTED NOTE: Press to clear the measurement taken. - Page 7 Safety the Pythagorean theorem to calculate ENVIRONMENTAL PROTECTION vertical distances that are difficult to access. Recycle raw materials instead of disposing of 1. Press activate indirect as waste. The machine, measurement. is displayed. accessories and packaging 2. Press to take the measurement of the oblique distance.
- Page 8 Getting started...
- Page 9 Operation L + L + L ... L + L + L ...
- Page 10 Operation L - L - L ... L - L - L ...
- Page 11 Operation...
- Page 12 Operation H = ? 1.689m 5.109m 5.109m...
- Page 13 Operation L x W...
- Page 14 Operation L x W x H...
-
Page 15: Troubleshooting
TROUBLESHOOTING ERROR CODE DESCRIPTION SOLUTION Err01 Out of measuring range Measure in a proper range Err02 Reflected signal is too weak Choose a better surface Err03 Out of display range (max value: Divide calculation into 99,999), intermediate steps e.g., result of area or volume is out of display range Err04 Pythagorean calculation error... - Page 16 Techtronic Industries (Australia) Pty. Ltd. Level 1, 660 Doncaster Road Doncaster, VIC 3108, Australia Techtronic Industries New Zealand Ltd. 18-26 Amelia Earhart Avenue Mangere, Auckland 2022, New Zealand Rev. 03...
Need help?
Do you have a question about the RLM30 and is the answer not in the manual?
Questions and answers