Troubleshooting - Tommee Tippee 1120 Instructions For Use Manual

4. TROUBLESHOOTING

1. Do not use the unit for anything other than the intended use.
This unit is not suitable for:
• Cooking rice, noodles and pasta
• Heating liquids, soup or water
• Chopping hard ingredients such as ice cubes and sugar lumps
• Cooking frozen foods
• Defrosting and reheating food or keeping food warm
• Heating baby food jars
• Heating bottles
2. Do not use before water tank is filled with water, unless using the blend only cycle.
3. During the automatic steam and blend cycle, the blades will turn to circulate the food.
The unit is designed to do this and is a normal part of cycle.
4. Once a steam and blend, steam only or blend only cycle has been set, if the container has not been assembled
correctly and the power button is pressed to start a cycle, a continuous beep will sound.
5. The unit will not start operating if the lid is not placed on the container before locking into place.
6. If the container is loosed or removed from the unit during a cycle, it will automatically stop and a beep will sound
for 10 seconds. The cycle will be paused and the appliance will return to standby state until the container is put
back and fixed in place, to continue the cycle, press the power button.
7. In the unlikely event that the water tank boils dry during steaming, the unit will beep, stop automatically and display
'E001' on the LDC display. If this occurs, start a new cycle and replace the food. Unplug the unit, allow unit to stand
for 2 minutes before filling the water tank with 450ml of cold water. Re-set cycle following the instructions in the
usage section.
8. Quickly set the timer by holding down the + and - buttons.
Model number: 1120. Voltage: 220-240V
This product complies with European Low Voltage Directive 2006/95/EC and EMC Directive 2004/108/EC.
Copyright © Jackel International Limited 2015.
Jackel International Limited trading as Mayborn Group
Northumberland Business Park West
Cramlington Northumberland
NE23 7RH, UK
TOMMEE TIPPEE is a registered trademark of Jackel International Limited. Jackel International Limited retains all intellectual property
rights to this product, packaging and printed or electronic media including all two and three dimensional designs, graphic images, logos
and text. Jackel International Limited is incorporated in England and Wales under company number 01894022.
Any manufacture, publication, copying, hiring, lending and reproduction of any materials is strictly prohibited and constitutes
infringement.
International patent applications pending.
Information on the disposal for Waste Electrical & Electronic Equipment (WEEE) This symbol on the products and
accompanying documents means that used electrical and electronic products should not be mixed with general
household waste. For proper disposal for treatment, recovery and recycling, please take these products to designated
collection points where they will be accepted on a free of charge basis. In some countries you may be able to return
your products to your local retailer upon the purchase of a new product. Disposing of this product correctly will help
you save valuable resources and prevent any possible effects on human health and the environment, which could otherwise arise from
inappropriate waste handling. Please contact your local authority for further details of your nearest collection point for WEEE. Penalties
may be applicable for the incorrect disposal of this product in accordance with national legislation.
The product is fitted with a BS 1363 mains plug containing a 13A fuse. If it ever becomes necessary to replace the fuse, only use fuses that
are marked BS 1362, and rated at 13A. In the unlikely event that this plug is not suitable for the sockets in your home, it should be removed
and a suitable plug fitted as follows: The wires of the mains lead are coloured in accordance with the following code:GREEN AND YELLOW
– EARTH. BLUE – NEUTRAL. BROWN – LIVE As these colours may not correspond with the coloured markings sometimes used to identify
the terminals in the plug, connect as follows. The wire coloured GREEN AND YELLOW must be connected to the terminal marked E or by
the earth symbol or coloured GREEN or GREEN AND YELLOW. The wire coloured BLUE must be connected to the terminal marked N or
coloured BLACK. The wire coloured BROWN must be connected to the terminal marked L or coloured RED. If you are in any doubt about
how to wire a plug or replace a fuse safely, consult a qualified electrician.
50/60Hz 630W.
~