Meet Me Pa G; Call Park And Pa G; Setting A Message Indicat I O - Samsung 6B ENHANCED User Manual

MEET ME PA G E
• Lift the handset.
• Press the MEET ME PAGE (MMPG) key or dial 5 4.
• Dial the desired zone number.
• After the attention tone, instruct the paged person to dial 5 6.
• Press WAIT or T R S F.
• Remain off-hook until the person dials 5 6 from any phone.
• The paged person will be automatically connected with you.
CALL PARK AND PA G E
When you have a call for someone who is not at their desk, you can
park the call and page the required party:
• While in conversation, press the PA G E button. the call is
automatically parked at your station.
• Dial the desired page zone and announce "park" and your
extension number or the line number.
• Hang up.
To retrieve a parked call:
• Press a PA R K key or dial 1 0 plus the line or extension number
a n n o u n c e d .
• You will be connected to the parked call.
NOTES: 1. If the parked call is not received within a pre-programmed
period of time, it will recall your keyset and have a slow
flashing amber light.
2. You cannot park and page intercom calls.
SETTING A MESSAGE INDICAT I O N
To leave a message at another station or station when no one
answers or you receive a busy signal:
• Press the M S G key or dial 4 3 and receive confirmation tone.
• Hang up.
(The M S G key on the called station or on all of the stations in the
group will light. Standard telephones receive special dial tone as a
message indication.)
NOTE: A station can have up to five message indications.
23