Cable Connections; Connect To Power - Blue Ridge DTA Mini Box Important Safety Instructions Manual

Cable Connections

1
Coax Connection to your
DTA Mini Box
A. Find the coax cable connected to the back of
your TV.
B. Remove the coax from the TV and connect it to the
Cable In on the back of your DTA Mini Box.
CABLE IN
3
2
HDMI Set-up
HDMI or Coax Connection to TV
A. If your TV has an HDMI input connection use
the enclosed HDMI cable to connect the DTA
Mini Box to the TV.
HDMI (IN)
To TV
CABLE IN
B. If you don't have an HDMI
port on your TV, use the
enclosed COAX cable to
connect the DTA Mini Box
to the TV.
HDMI Set-up
3

Connect to power

A. Plug in the power cord to your DTA Mini Box,
then set the input on your TV (HDMI if you used
the HDMI cable, or Channel 3 if you used the
Coax cable).
To TV
4
Activate your DTA Mini Box
Before you activate
A. Complete the Cable Connection steps
prior to activating.
B. Have your Account Number Accessible. This is typically
found on your Billing Statement.
Now you are ready to activate!
C. Call 1-800-CABLE 77 or
Log onto www.brctv.com/alldigital
Note: Installation and activation will not impact your current
existing cable service.
4