User manual
Valid for Corentium with S/N from 2XXXXXXXXX
KEY TO FIGURE
1.
Low battery level indicator. Change batteries as soon as possible when this icon appears
2.
'LONG TERM AVERAGE'. Long term average
3.
Measuring value
4.
'SHORT TERM AVERAGE'. Short term average
5.
Measurement period for short term average. Ranges between 1 and 7 days
6.
Measurement indicator. Blinks when the meter is active
7.
Unit of measure: pCi/L (Picocurie per liter air)
8.
'RESET'. Reset button. Use to start a new measurement period. OBS: Removes all stored
data from the previous measurement
9.
'MODE'. Button to display number of measurement days since the last reset. Appears on the
screen for 20 seconds
10. Battery holder for 3 x AAA alkaline batteries (LR03)
11. Opening of battery cover
12. USB input. For use by manufacturer
SAFETY
Please contact the seller should the meter require service or repair. The cover will not open.
Avoid dropping or hitting the meter, as well as pressure, vibration, dust and moisture.
Condensation may occur if the meter is moved from one place with high humidity to a cold place.
If moisture condensation occurs, remove the batteries and place the monitor in a dry place for 2
hours. The meter should not be exposed to direct sunlight for long periods.
Need help?
Do you have a question about the CORENTIUM and is the answer not in the manual?
Questions and answers
What is the meaning of the error message Err 778?
I have a unit measuring pCi/L. Is there a way to switch to Bq/m3 ?
The Airthings CORENTIUM unit does not have an option to switch between pCi/L and Bq/m³. The unit's measurement system is fixed based on the model purchased (U.S. models use pCi/L, while non-U.S. models use Bq/m³). There is no built-in toggle or button to change the units.
This answer is automatically generated