Gudsen MOZA Air User Manual page 11

Balancing
Balancing the Tilt Adjustment Arm
1.Please loosen Tilt Adjustment Screw and adjust the Tilt
Adjustment Arm until it remains still with the lens facing
vertical or toward the ground.
2.Once balanced tighten the Tilt Adjustment Screw.
Balancing the Roll Adjustment Arm
1.Please loosen the quick Release system adjustment
screw, be sure to leave a little space between the camera
and the motor, in this case move the quick release plate to
the till motor as possible as you can, then tighten the quick
Release system adjustment screw.
2.Please loosen the Roll Adjustment Screw and adjust
the Roll Adjustment Arm until the camera remains still and
level with the horizon.
3.Once balanced tighten the Roll Adjustment Screw.
Balancing the Yaw Adjustment Arm
1.Please loosen the Yaw Adjustment
Screw and adjust the Yaw Adjustment Arm
until the camera remains still and level with
the horizon.
2.Once balanced
Adjustment Screw.
08
tighten the Yaw