Skyrc Toro TS120 Competition Instruction Manual page 2

ESC PROGRAMMING
The ESC can be programmed by program box, PC (connected with SKYLINK) or smart phone
via bluetooth module.
Programmable Items and Description
Section Program Item Description
Running Mode Forward/Brake Forward/Brake/Reverse Forward/Reverse
Motor Direction Normal Reverse
General Reverse Speed 25-100% (in 1% increament)
Setting Voltage Cutoff 3.0-11V (in 0.1V increament) Auto (3.2V)
ESC Overheat Protection
85℃/185℉ 105℃/221℉ 125℃/257℉
Motor Overheat Protection 105℃/221℉ 125℃/257℉
85℃/185℉
Punch Rate Switch Point
1-99%(in 1% increament)
1st Stage Punch Rate 1-100%(in 1% increament)
Throttle 2nd Stage Punch Rate 1-100%(in 1% increament)
Control TH Input Curve Line Custom
Throttle Dead Band 0.002-0.150ms
Throttle Status
Drag Brake
1-100%(in 1% increament)
Brake Strenth
0-100%(in 1% increament)
Initial Brake =Drag Brake
0-50%
Brake
Brake Rate Switch Point
1-99%(in 1% increament)
Control
1st Stage Brake Rate
1-100%(in 1% increament)
2nd Stage Brake Rate 1-100%(in 1% increament)
Brake Input Curve Line Custom
Boost Timing 0-64 deg (in 1° increament)
Boost Start RPM 1000-35000RPM (in 500RPM increament)
Boost
Boost End RPM 3000-60000RPM(in 500RPM increament)
Timing
Boost Liner Slop Line Custom
Boost Constrain by TH
Yes No
Turbo Timing
0-64 deg (in 1° increament)
Turbo Activation Method RPM Full TH+RPM
Full TH
Turbo Turbo Full TH Delay Instant 0.05-1S(in 0.05S increament)
Timing Turbo Start RPM 9000-50000RPM/MIN(in 1000RPM increament)
Turbo Engage Slop 1-64 deg/0.1S (in 1° increament)
Turbo Deactive Slop Instant 1-64 deg/0.1S(in 1°increament)
*The output power of the motor will be improved when you adjust the motor timing.
Electronic motor timing will increase the temperatures of ESC and brushless motor. Use
extreme caution when setting up and testing your application to avoid overloading and
overheating. Incorrect Boost and Turbo timing setting may cause permanent damage to the
ESC and motors. Please choose proper ratio and timing setting according to motor's
instruction.
Here is some suggestions about motor timing,
Motor Turns 3.5T/4.0T 4.5T/5.5T 6.5T/7.5T 8.5T/9.5T 10.5T/11.5T
Boost Timing
0 0 10 15 20
Turbo Timing 10 15 45 55 45
5/8
Profiles Preset
The users could preset and store 10 sets of profiles in the ESC. These data could be called
out for application at any time without any special program setting. The user could also reset
the profile according to his request. There is one factory default setting called Modify in the
ESC. This mode can be used for modify class of touring car racing.
Setting Details of Modify Mode
Modify Mode Setting Value
Program Item
Section
Running Mode
Motor Direction
Disable
Disable General Reverse Speed
Setting Voltage Cutoff
ESC Overheat Protection
Motor Overheat Protection
Punch Rate Switch Point
1st Stage Punch Rate
Throttle 2nd Stage Punch Rate
TH Input Curve
Control
Throttle Dead Band
Throttle Status
Drag Brake
Brake Strenth
Initial Brake
Brake
Brake Rate Switch Point
Control
1st Stage Brake Rate
2nd Stage Brake Rate
Brake Input Curve
Boost Timing
Boost Start RPM
Boost
Boost End RPM
Timing
Boost Liner Slop
Boost Constrain by TH
Turbo Timing
Turbo Activation Method
Turbo Turbo Full TH Delay
Timing Turbo Start RPM
Turbo Engage Slop
Turbo Deactive Slop
≥13.5T
30
55
6/8
How to program the ESC?
1. PC via SKYLINK (optional part SK-600013)
Fan output pins
Description
Forward/Brake
Power
Normal
Switch
25%
3.2V/1S
105℃/221℉
105℃/221℉
50%
2. Smart Phone via Bluetooth Moudle (optional part SK-600058)
25%
50%
Line
0.080ms
10%
Power
75%
Switch
=Drag Brake
50%
75%
95%
Line
0°
SMART
Bluetooth
15000RPM/MIN
PHONE
25000RPM/MIN
Line
3. Program Box (optional part SK-300046)
Yes
10°
Full TH
Fan output pins
0.1S
20000RPM/MIN
62°/0.1S
40°/0.1S
SPECIFICATION
Red power wire
Constant/Burst Current
(battery positive)
Motor Compatible
Battery
Pack
Car Compatible
Motor Limits
Black power wire
(battery negative)
Resistance
Battery Cell Count
PC
BEC Output
Size
Weight
FAN
REMARK: All the testing results are working with 540 class motors with standard timing.
Red power wire
(battery positive)
WARRANTY AND SERVICE
Battery
Pack
The TORO 10 Brushless ESC is guaranteed to be free from defects in materials or
workmanship for a period of 90 DAYS from the original date of purchase (verified by dated,
itemized sales receipt). Warranty does not cover incorrect installation, components worn by
use, damage to case or exposed circuit boards, damage due to timing, damage from using
more than 3 LiPo cells input voltage, cross-connection of battery/motor power wires,
overheating solder tabs, reverse voltage application, improper use or installation of external
Black power wire
(battery negative)
BEC, damage resulting from thermal overload or short-circuiting motor, damage from
incorrect installation of FET servo or receiver battery pack, tampering with internal
electronics, allowing water, moisture, or any other foreign material to enter ESC or get onto
the PC board, incorrect installation/wiring of input plug plastic, allowing exposed wiring or
solder tabs to short-circuit, or any damage caused by a crash, flooding or natural disaster.
Because SKYRC has no control over the connection & use of the speed control or other
Red power wire related electronics, no liability may be assumed nor will be accepted for any damage
(battery positive)
resulting from the use of this product. Every SKYRC speed control & motor is thoroughly
tested & cycled before leaving our facility and is, therefore, considered operational. By the
Battery
Pack
act of connecting/operating speed control, user accepts all resulting liability. In no case shall
our liability exceed the product's original cost. We reserve the right to modify warranty
provisions without notice. This product is not intended for use by children under 14 years of
age without the strict supervision of an adult. Use of this product in an uncontrolled manner
Black power wire
(battery negative) may result in physical damage or injuries take extra care when operating any remote control.
Power
Switch
7/8
120A/760A
Brushless Sensor & Sensorless ESC
1/10 and 1/12 Buggy and Truck
1/10 and 1/8 Crawlers
5-6S NiMH or 2S LiPo--≥3.5T(1/10 Buggy), ≥5.5T(1/10 Truck)
8-9S NiMH or 3S LiPo--≥5.5T(1/10 Buggy), ≥8.5T(1/10 Truck)
0.0003ohm
4-9S NiMH or 2-3S LiPo
6V@3A, line
39x38x20mm (LxWxH)
45g (w/o wire)
8V@0.2A , MAX 12.6V
Manufactured by
SKYRC TECHNOLOGY CO., LTD.
90
14
DAYS +Yr
www.skyrc.com
2013 SkyRC Technology Co., Ltd. All Rights Reserved.
7504-0332-01 Ver 1.0
8/8