Section 6 - General Specifications & Operator Maintenance; Introduction; Operating Specifications; Operating Specifications - Prior To S/N 0300141435 - JLG E450AJ Operation And Safety Manual

SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.1

INTRODUCTION

This section of the manual provides additional necessary
information to the operator for proper operation and mainte-
nance of this machine.
The maintenance portion of this section is intended as infor-
mation to assist the machine operator to perform daily main-
tenance tasks only, and does not replace the more thorough
Preventive Maintenance and Inspection Schedule included
in the Service and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual -
ANSI, CSA Spec ............................................... 3121127
Service and Maintenance Manual - CE Spec........... 3121829
Illustrated Parts Manual - ANSI, CSA Spec .............. 3121128
Illustrated Parts Manual - CE Spec........................... 3121830
3121210
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.2
– JLG Lift –

OPERATING SPECIFICATIONS

Table 6-1. Operating Specifications - Prior to S/N 0300141435
Maximum Work Load (Capacity)
Unrestricted:
Travel Speed
Maximum Travel Grade (Gradeablility
Maximum Travel Grade (Side Slope)
Maximum Height: (stowed)
E450A/M450A
E450AJ/M450AJ
Maximum Horizontal Platform Reach
E450A
E450AJ
Turning Radius (Curb to Curb)
Turning Radius (inside)
Maximum Tire Load:
M450A, E450A
M450AJ, E450AJ
500 lb. (230 kg)
3.2 mph (5.2 kph)
30%
5°
6 ft. 6.25 in. (1.9 m)
6 ft. 7 in. (2.0 m)
23 ft. 1in.(7.0 m)
23 ft. 9 in. (7.24 m)
15 ft. 3 in. (4.65 m)
2 ft. (0.61 m)
6100 lbs. (2,767 kg)
6900 lbs. (3,130 kg)
6-1