Hitachi Compute Blade 320 Instruction Manual page 41

8. Copy the driver file to any directory in the system. In this procedure, the directory /tmp/work/ is made for example.
< When using "Driver & Utility" >
# mkdir /tmp/work
# cp -p /media/[path to the driver file] /tmp/work
# cd /tmp/work
# umount /media
<< Path to the driver file >>
OS
RHEL 6 [x86]
RHEL 6 [x64]
9. Install the driver with the following command.
# rpm -Uvh [driver file name]
<< Driver file name >>
OS
RHEL 6 [x86]
RHEL 6 [x64]
10. Confirm the newly installed driver version with the following command.
# modinfo -F version lpfc
11. If the driver version is correct, the installation procedure is complete.
If the driver version is not correct, repeat the procedure from step 4.
12. Update the image of initial boot.
!
The following procedure must be applied for both FC boot and FC data connection.
Note
Backup the image file. "/boot/initramfs-[current kernel version].img.org" is made for the backup file
in this procedure for example. Execute the following commands.
# cp -a /boot/initramfs-[current kernel version].img /boot/initramfs-[current kernel version].img.org
# dracut -f /boot/initramfs-[current kernel version].img
13. If kdump is configured, execute the following commands
# touch /etc/kdump.conf
# service kdump restart
Stopping kdump:
Detected change(s) the following file(s):
/etc/kdump.conf
Rebuilding /boot/initrd-2.6.32-358.11.1.el6.x86_64kdump.img
Starting kdump:
/rpms/i686/kmod-lpfc-[version].el6.i686.rpm
/rpms/x86_64/kmod-lpfc-[version].el6.x86_64.rpm
kmod-lpfc-[version].el6.i686.rpm
kmod-lpfc-[version].el6.x86_64.rpm
[ OK ]
[ OK ]
Installing the Driver and Utility
< When using "Server Installation and Monitoring Tool >
# mkdir /tmp/work
# cp –p /mnt/iso2/[path to the driver file] /tmp/work
# cd /tmp/work
# umount /mnt/iso2
Path to the driver file
Driver file name
5-19