Account/Call Settings - Grandstream Networks GXV3370 Administration Manual

Account/Call Settings

Apply Function
Start Video
Permits the phone system to enable the video feature automatically when it makes
Automatically an outbound call. If set to "Yes", the video codec attributes will be included in the SIP
INVITE message. Or the attributes will not be included.
The default setting is "Yes".
Remote Video
Configures the preference to handle video request from the remote party during an
Request
audio call. It can be selected from the dropdown list.
•
"Prompt": A message will be prompted if a video request is received. Users can
select "Yes" to establish video or "No" to reject the request.
•
"Accept": Video request will be accepted automatically, and video will be
established.
•
"Deny": Video request will be rejected automatically. The default is "prompt".
Auto Answer
Sets the phone system to allow to answer an incoming call automatically when idle.
when Idle If it is set to "Yes", the phone will automatically enable the speaker phone to answer
all the incoming calls after a short reminding beep. If set to "Enable Intercom/Paging",
it will automatically answer the incoming calls whose SIP INVITE includes auto-
answer tag in the info header. Default setting is "Yes".
Play Warning
When this option is enabled, the phone will play a warning tone When auto-answering
Tone for Auto intercom. The default setting is "yes".
Answer
Intercom
Intercom
Configures whether to answer the incoming intercom call when there is already an
Barging active call on the phone. When" Intercom Barging" is enabled, and if the current
active call is an intercom call, the incoming intercom call will be automatically
rejected; otherwise if the current active call is not an intercom call, the current active
call will be put on hold and the incoming intercom will be automatically answered.
When "Intercom Barging" is disabled, a prompt will show up indicating the incoming
intercom call without interrupting the current active call. Default setting is disabled.
Auto Preview
Configures whether to turn on video to preview the video of the caller. If set to
"Yes", the user can view the video and hear the caller on the incoming page when
there is an incoming call. If set to "Yes with Ringing", the caller can view the video
of the caller and hear the ringtone on the incoming page but cannot hear the caller.
Note: If Auto Answer function has been enabled, this function does not take effect.
Default Value: "No".
Send Sets the phone system to make an anonymous outgoing call. If it's set to "Yes", the
Anonymous "From" header in the SIP INVITE messages will be set to anonymous, essentially
blocking the Caller ID to be displayed. The default setting is "No".
GXV3370 Administration Guide
Version 1.0.1.12
P a g e |
47