Table of Contents
Advertisement
3.
"Settings Menu...X" will appear on
the display, where X indicates the
time (in seconds) during which the
buttons need to be kept pressed.
4.
After entering into the Settings
menu, press Function Button (4) to
switch between the main menus.
You will switch to the next main
menu with each press of the button.
You will switch to the first main
menu if you press the Function
Button while you are in the final
main menu. (Language Selection,
Screen Brightness, Contrast
Setting, Display mode, Volume,
Water Hardness Setting, Melody
Settings, Factory Settings?, Back
to Prog. Menu)
5.
Press "> - <" Selection Buttons (7)
to make changes in the submenus.
6.
Press Confirmation Button (6) to
store your changes in the submenu.
7.
"** Stored! **'" will be displayed
after you press the Confirmation
Button.
8.
If you press Function Button
without making any changes in the
submenu, you will switch to the next
settings menu and submenu values
will not be stored.
9.
Select "Back to Prog. Menu" and
press Confirmation Button to exit
the Settings Menu.
Time Delay, Start/Pause/Cancel Buttons
have no function in settings menu.
Pressing these buttons has no effect.
There are 10 different language
options in the Language Selection
menu.
You need to adjust the Water Hardness
level to one of the following values
that suits the properties of your supply
system:
1- Lime free,
2- Very little limy
3- Less limy
4- Mediocre limy
5- Limy
6- Very much limy
You may determine the hardness level
of the supply water by means of the
hardness measurement kit supplied
together with the dishwasher. Please
refer to the Adjusting the Water
Softening System section in the user
manual for detailed information.
You may enable the dishwasher to
warn you audibly thanks to the Volume
setting. You can select one of the
following options:
0- Off
1- Medium
2- High
You may adjust Screen Brightness
between 1 - 3.
You may adjust Screen Contrast
between 1 - 3.
You may adjust Melody between 1 - 4.
28 GB
Advertisement
Table of Contents
