Electronic Braking System; Maintenance - Powakaddy FW3S Owner's Manual

Distance Units

Electronic Braking System

5
EBS symbol indicates braking function active
WARNING! EBS is an assisted braking system for hill descent not a 100% parking brake. The trolley must be powered on and the
wheels engaged with the clutch for the braking system to function. The drive system uses a limited slip differential to allow braking
and provide ease of manoeuvrability. Try to avoid traversing a steep hill as the load of the trolley will mostly be applied to the lower
wheel on the slope, and may cause the higher wheel to slip. If your trolley loses traction and the wheels start to spin apply more even
pressure on the handle to increase traction of both wheels. Engage the braking progressively as you descend a slope.
Caution: Wet or loose ground can cause the wheels to lock and slip on steep slopes. When using the maximum braking force
always maintain a firm grip on the handle to assist the trolley and avoid injury or damage.

Maintenance

Your PowaKaddy trolley is simple to maintain.
Never jet wash your trolley or immerse into water. Occasionally remove the wheels and apply grease to the axle and moving parts.
Your serial number can be found on the underside of the main body chassis. Keep a note of the serial number for reference in the
box provided above.
Security Pin: With the padlock icon highlighted you can turn the PIN function on and
off by pressing the central control knob. To select your security PIN rotate the control
knob to select your 4 digit code, save each digit by pressing the control knob. Repeat
for each digit and then press and hold both buttons to save the new PIN.
Note: if you have added a PIN lock this will be required every time you turn the trolley
on. In the event you have forgotten your PIN you can use the default factory PIN:
to unlock the controls.
Distance Measurement Preference: This will change the type of measurement and
ADF functions from yards (miles) to metres (Km). Push the Central Control Knob to
select either option.
Pin Function
The Electronic Braking System is an optional extra within the Freeway Range. The EBS
has the added advantage of an Electronic Braking System (EBS) for hill decent control
thus creating the ultimate machine for all conditions.
To activate the braking function:
1: Ensure the motor and power is on.
2: Rotate the control knob counter-clockwise until you go below zero. The EBS logo
will appear next to the power setting to indicate the braking function, which will display
between 1, 2 and 3 indicating the level of braking force being applied, 3 being the
highest.
3: Rotate the control knob clockwise to return to normal power settings.
Note: you do not have to pause the trolley between the standard power and EBS
braking mode
S/N: A
7921