Advertisement
Table of Contents
The future is now
Thank you for believing in our vision of
the smart home and congratulations to a
fantastic smart home experience.
If this is your first time with Animus Home,
please follow this quick 3-step installation to
get yourself connected correctly.
NEED TECHNICAL SUPPORT?
Visit our support page at
animushome.com/support
Package Content
Animus Heart
Power Adapter
LAN Cable
Quick Installation Guide
Quick Installation
Connect your Animus Heart to your
1
Internet router by using the included
LAN-cable.
Animus Heart works best if installed in a central
location to where your smart devices will be
placed.
Compatibility
Customize your home with the devices that you
like. Animus Heart supports a wide variety of
devices and this list is continously growing.
Visit our partners-page to see the full
compatibility list.
animushome.com/partners
Now connect your Animus Heart to a
2
power source by using the included
power adapter.
Avoid installing the Animus Heart near
or inside sources of metal, radio or
electromagnetic interference.
Simple To Use
Clean and simple in every aspect. We removed
all confusion by keeping it free from buttons.
A
B
C
A. Power
Regular 2.1mm power connection to be
used with the included adapter and cable.
B. LAN
Provides connectivity to the network by
ethernet cable (optional).
C. USB (2)
Provides connection through USB for
other devices, e.g. external storage.
Finally download the Animus Home
3
Mobile app on the App Store or the
Google Play and follow the simple guide
in the app.
You're now ready to enjoy
your Animus Home!
Feedback
Animus Heart has an integrated halo (status
light) to let you know the status of your smart
home.
Active
Recovery
Updating
Error
Flip this over for more information.
Advertisement
Table of Contents
Summary of Contents for Animus Home AB Animus Heart AHG1
- Page 1 Quick Installation The future is now Connect your Animus Heart to your Now connect your Animus Heart to a Finally download the Animus Home Internet router by using the included power source by using the included Mobile app on the App Store or the Thank you for believing in our vision of LAN-cable.
- Page 2 Goods (CISG). Any dispute shall be settled in a Swedish apply to the extent permitted by applicable consumer Copyright 2018 Animus Home AB. All rights reserved. public court with the District Court of Malmö being the protection legislation. You expressly agree that your use first instance.
-
Page 3: What Is Z-Wave
Include/Exclude Z-Wave Devices What is Z-Wave? Z-Wave is a radio protocol widely used in smart home devices. Devices in the Z-Wave protocol all work within the same rules and these rules are built to fit the smart home industry. If you wish to know more about Z-Wave, please go to this article. - Page 4 2. When the exclusion is done, or if is fails, this is printed to the console. Replace failed The process of replacing a failed Z-Wave product with another (non-included) device is the same as adding a new Z-Wave device (through the console), except that the first step is: add start <failed node to replace>...
-
Page 5: Learn Mode
Learn mode To put the Heart into Z-Wave learn mode : 1. Enter the Web Terminal in the Animus Heart GUI. 2. Enter Z-Wave command group (see Terminal) 3. Start Learn mode by typing learn start (To start learn mode in classic mode (only accept Heart to be included in direct range) type 'learn start classic' instead) Include/Exclude Animus Heart from a Z-Wave network Inclusion to and exclusion from a Z-Wave network is done by:... -
Page 6: Association Groups
Association Groups Associations Associations can be used to make a device send control commands directly to other devices in the Z-Wave Network. Associations are set on the devices that will send out the control commands. Read the manual of the device for details on what associations groups are supported for that specific device. - Page 7 Z-Wave Factory Reset Reset Z-Wave controller through the GUI To reset the Z-Wave controller you need to access the package controller. This is explained in Advanced Settings. Enter the Z-Wave Package: Here you can choose to reset the Z-Wave controller. Click → Reset data. Before resetting! If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all...
- Page 8 Reset Z-Wave controller through the Terminal 1. Enter the Web Terminal / Console in the Animus Heart GUI. 2. Enter Z-Wave command group (see Web Terminal / Console) 3. Start factory reset by running the factoryreset command factoryreset 4. Wait some minutes to allow the factory reset to complete. Complete Factory Reset Enter recovery mode if you wish to factory reset the complete device...
Need help?
Do you have a question about the Animus Heart AHG1 and is the answer not in the manual?
Questions and answers