Adding Users To Cisco Unified Communications Manager - Cisco ATA 190 Administration Manual

Adding Users to Cisco Unified Communications Manager

Table 4-3
Parameter
Offhook Validation Timer
(50-1000ms)
Onhook Validation Timer
(50-1000ms)
Hookflash Timer
(100 to 1500 ms)
Onhook Delay Timer
(0 to 155 ms)
Reorder Delay (0-30s)
RTP Packet Time (10-160ms)
User can access the ATA 190 web page and perform limited configuration. Two access modes exist:
Note
Admin mode and User mode.
•
•
In Admin mode, most information and settings are available.
A user can modify the username/password on the Administration > Management > User List page.
In User mode, only limited information and access are available.
Adding Users to Cisco Unified Communications Manager
Adding users to Cisco Unified Communications Manager allows you to display and maintain
information about users and allows each user to perform these tasks:
•
•
•
•
You can add users to Cisco Unified Communications Manager using this method:
•
Refer to the Cisco Unified Communications Manager Administration Guide for more information about
adding users. Refer to the Cisco Unified Communications Manager System Guide for details about user
information.
Cisco ATA 190 Analog Telephone Adapter Administration Guide for SIP (Version 1.1)
4-6
Configuration Parameters for the ATA 190 (continued)
The default username/password for Admin mode is admin/admin.
The default username/password for User mode is cisco/cisco.
Access the corporate directory and other customized directories from an ATA 190.
Create a personal directory.
Set up speed dial and call forwarding numbers.
Subscribe to services that are accessible from an ATA 190.
To add users individually, choose User Management > End User from Cisco Unified
Communications Manager Administration.
Description
Indicates the time to validate an offhook event.
This parameter is reserved but does take effect now.
Note
Indicates the time to validate an onhook event
Indicates the time to validate a hookflash event
Indicates the time to delay an onhook event.
This parameter does not take effect.
Note
Delay after far end hangs up before reorder tone is played.
Packet size in milliseconds for RTP.
Chapter 4 Configuring the ATA 190
OL-31821-02