Preamplifier - Kenwood TS-890S Instruction Manual

Screen
Ⓕ
Ⓖ
Ⓗ
Ⓘ
Ⓙ
.
Area Display
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Ⓐ
Ⓑ
Appears when an RX antenna is functioning.
Displays the antenna number. Switches the antenna number accordingly when the antenna is
switched. It is not displayed when the TX output power destination of the transverter is drive output
(DRV).
Appears when antenna output for the external receiver is functioning.
Appears when the receiving attenuator is configured to "6 dB", "12 dB" or "18 dB".
Appears when the receive preamplifier 1 is ON.
Appears when the receive preamplifier 2 is ON.
Appears when AGC is OFF.
Appears when AGC is configured to "FAST".
Appears when AGC is configured to "MID".
Appears when AGC is configured to "SLOW".
Appears when Tone is ON.
Appears when CTCSS is ON.
Appears when Cross Tone is ON.
Displays the antenna tuner function and operating status.
<< >> lights up when the antenna tuner is ON during reception.
<< >> blinks while antenna tuning is in progress.
Appears when the transverter is ON.
Blinks while TX tuning is ON.
Displays the TX output power level. (Not displayed when the TX output power destination is drive
output (DRV).)
Displayed in yellow when the output power is limited by the TX output power limiter function.
Displays the drive output level. (Displayed when drive output is ON.)
Displays the keying speed. Turning the [KEY SPEED] control displays the keying speed (4 to 60
words/minute) in the TX output power area for 2 seconds.
Displays the date of the local clock. The date can be displayed in the UK, US or Japanese format.
Displays the time (24-hour format).
Left: Displays the time of the local clock.
Right: Displays the time of the auxiliary clock (indicated by the character "U" at the end).
NAMES AND FUNCTIONS OF PARTS 2
Ⓒ Ⓓ Ⓔ
Description
Refer
to
4-10
4-10
16-15
6-1
5-6
5-2
5-29
5-30
5-30
4-11
16-15
8-7
4-7
4-10
5-13
14-1
14-1
2-9