Table of Contents
Advertisement
Troubleshooting
Resetting the watch — All Reset
When the watch does not work properly, you can reset all the settings. If the power
reserve is insufficient, charge the watch first.
Be sure to perform the following operations after All Reset.
1
Correct the reference positions.
After All Reset, the watch is in the reference position adjustment
mode.
Refer to step 3 and after on page 61.
2
Set the world time. (page
3
Adjust the time and calendar.
Adjust the time and calendar manually (page 56) or by receiving
time signals (page 29).
68
)
24
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Eco-Drive E660 and is the answer not in the manual?
Questions and answers
setting time
To set the time on a Citizen Eco-Drive E660 watch, follow these steps:
1. Pull the crown out to position 1.
2. Rotate the crown to move the mode hand to point to [SET].
3. Pull the crown out to position 2. The second hand will point to 0 seconds and stop.
4. Press and release the lower right button (A). The hour and minute hands will slightly move, and the time and calendar will become adjustable.
5. Press and release button (A) repeatedly to cycle through the settings in the following order:
- Hour/minute/24-hour → Date → Year/Month → Day of the week → (Back to the top)
6. Adjust each setting as needed by rotating the crown.
7. Once all adjustments are complete, push the crown back to position 0.
This will set the correct time and calendar on the watch.
This answer is automatically generated