Installing The Spinner; Installing The Throttle Pushrod - Black Horse Model Midget Mustang Instruction Manual Book

MIDGET-MUSTANG -
INSTRUCTION MANUAL
Item code: BH83.
Trim and cut

INSTALLING THE SPINNER.

Install the spinner backplate, propeller and
spinner cone. The spinner cone is held in
place using two 3mm x 12mm wood screws.
3 x 12mm
Left side
Right side
Left side
Bottom side
Secure.

INSTALLING THE THROTTLE PUSHROD.

Install one adjustable metal connector
through the third hole out from the center of
one servo arm, enlarge the hole in the servo
arm using a 2mm drill bit to accommodate the
servo connector. Remove the excess mate-
Front view.
rial from the arm.
15